20 Most Recent Nortel Networks M5216 Phone - Page 5 Questions & Answers

This is usually programmed as one of the 'soft' buttons down the right hand side of the device - subject to the programming of your phone / and the system.Usually the T7208 is connected to the BCM range of PBX systems - in which case, to transfer a call, you'd use Feature 70. You could, of course, program this into one of the buttons yourself, so you only have to press one button to do so.Hope this is of use to you. :)

google m7324 user card, you can also google norstar feature codes.

If the phone doesn't ring when called by the extension number of the phone then try to use the volume up button while someone is calling the phone. The volume is a multi-purpose button that doubles for phone volume and ringer volume. However, the only way to turn up the ringer is when a call is coming into the phone.

Need more info.

F983 and F985 are voice mail access feature codes. Try rebooting your voice mail system to see if the unit recovers. There is no switch so you will need to unplug the power to the VMS to reboot.

The set you called is forwarded to voice mail, but the phone doesn't have a mailbox.

here

In system programming, you can select whether the display is the name, number, or line. F**CONFIG Terminals&Sets enter extension # skip Line Access, Capabilities, Name, User Preferences Telco Features skip Feature Assign at 1StDisplay use CHANGE softkey to toggle to NAME.

Try Feature 65, then RLS

Check that the handset is plugged in correctly (some phones have a jack for a headset as well as handset. Try another handset. Try another handset cord (cords are a failure point). Make sure the cradle switch is not stuck down.

You need to enter the "Make Set Busy Deactivate Flexible Feature Code" - the "Flexible" part meaning the system administrator can change it, so you'll have to ask. The default appears to be #62.

Not to be too obvious, but did you mean Feature*98? Even then, it should be F*981, or another in that group: Voicemail Feature Codes Norstar Meridian and Nortel BCM Help Guides

Have you resolved this yet? If your CO connection is analog, it's done by your telco. If you have a PRI (T1), then it's in your system's configuration.

Basically, you want to disable Forward No Answer to voicemail: Feature ** CONFIG Terminals&Sets enter ext # advance past Line Access to Capabilities go to Fwd No Answer CHANGE softkey to None go to Fwd On Busy CHANGE softkey to None

The phone doesn't have any message capability - it is the central system (KSU) behind it, which can be one of several types. Generally, F981 will get you into the voicemail system, 0000 is the default password, else you will need to know the existing password for that extension, then follow the prompts (8=admin).