Top 20 Proton MS-42 LCD TV Questions & Answers


The LVDS cable is loose at the T_CON side. Simple fix. Take the back of of your set. It is the cable on the top middle that has a whole bunch of little twisted wires. With the set off take out the connector and the plug it back in tight. Turn on set and you should be back to normal.

Proton MS-42 LCD... | 24 views | 0 helpful votes


Yes, push the menu button on the remote and scroll through the menu items until you find the color adjustments. Joe

Proton MS-42 LCD... | 144 views | 0 helpful votes


What is wrong with it.

Proton Televison... | 504 views | 0 helpful votes


What exactly happens when the set shuts off?...does the power indicator lamp stay on, or does it blink. Also do you still have sound?

Proton Televison... | 27 views | 0 helpful votes


The TCON board or the LCD panel is faulty. You have to change the tcon board to confirm the fault
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Proton Televison... | 29 views | 0 helpful votes


Normally all the backlight inverters have fuse. It would be an SMd type.
Of you wish to get some more details check the link below
http://electro-medical.blogspot.com/

Proton Televison... | 42 views | 0 helpful votes


Back-light inverter board will have a fuse. Refer its circuit diagram to locate it. If it should blow up, there will be sufficient reason. Some short circuited components/s. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Circuit diagrams of many popular brand TVs and other devices are given.

Proton Televison... | 38 views | 0 helpful votes


No. There no seperate fuse for backlighting.

Proton Televison... | 33 views | 0 helpful votes


Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Proton Televison... | 65 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the relative post easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Proton Televison... | 49 views | 0 helpful votes


This is simple: set in the closed caption menu (some cable boxes also have it) called TEXT. Look in the menu and turn it off first in the set and also in the box used if used for signal.

Odd feature and never really took off--designed so some channels like PBS etc could broadcast text.

Proton Televison... | 71 views | 0 helpful votes


Hi,

Please let me know the model no. of your unit. Also, does the symptoms is the same to all inputs?

Jdvillanueva

Proton Televison... | 39 views | 0 helpful votes


Hi,

I am Sorry to Hear regarding the Problem. Unplug the Unit for Few Minutes, say 15 Minutes and then Turn it ON. Do you still see the Problem?

Have you tried to Run DVD Player. If not Use it and Check, if that is still the Case?

If Yes, this is an Internal Failure and You need to Open the TV to get it Resolved.If you wish, you could Contact a Local TV Repairman to get it Resolved or let me know the Make and Model and i would be able to Guide you.

Make sure to take all the Precautions and all the Security Measures.Also, tell me How Old the Unit is?

Make sure that you need to have Tools like Multimeter and Magnifying Glass and you need to have the Schematics ( We could also Search for Cost effective Service Manual, if that is available with any Vendor ).

Let me know,so that we could Proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Proton Televison... | 21 views | 0 helpful votes


Hi

There is no Point in getting the Remote repaired as the cost of Repair would be much more than the new remote. Yes, Original Remote is not available.The substitute remote is :-

http://remotes.com/store/protron/pltv3250.html

Is that the same one you purchased? Have you programed it correctly?

It could be an issue with the TV. The IR sensor which senses the signal from the remote might be Defective.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Proton Televison... | 59 views | 0 helpful votes


Just purchased a universal remote from jb hi fi

Proton Televison... | 58 views | 0 helpful votes


Check along the bottom toward either end. There you will find a led and scroll/select button. Press the middle button. Green is on Red is standby. No led lit, no power.

25c5fa04-e561-40fd-8b61-4b57b5a145f4.png


pic2-s1urlp32hjhaffldq12bd5wk-6-2.png


25c5fa04-e561-40fd-8b61-4b57b5a145f4.png

Televison &... | 69 views | 0 helpful votes


The following Astron LED 32 TV was advertised with built-in Netflix capability. https://shopee.ph/ASTRON-LED-32-TV-(brandnew)-i.118118557.4007371447

Changes in Netflix rendered current software versions incompatible with older sets. And here is a reference regard some 2010-2011 Samsungs being incompatible: https://www.bbc.com/news/technology-50331667

If your Astron's support is unavailable, an alternative is to try casting from your mobile device to the TV. https://help.netflix.com/en/node/49

https://www.astronelectronics.com.au/

Televison &... | 50 views | 0 helpful votes


It's a budget-friendly product adjust by using an internet connection you can convert your Tv into your favourite entertainment player with all the channels
available. Plus, it lets you watch and stream movies, TV shows, photos, and music from your personal collection too. For Roku tv setup and Roku Activation code with
Roku com/link creates an account.

https://www.tvsetuponline.com/

Televison &... | 15 views | 0 helpful votes


First, make sure that the source is set to TV. (Use the TV button at the top left of the remote to ensure that the TV is being controlled by the remote. The Source button is the one to the right of the Power button on the remote. It's the top button on the side of the TV. ) Next press Menu. (On the remote, it's the button to the upper left of the arrow keys. It's the second button from the top on the TV side panel.) Use the Up/Down arrow keys to navigate to Channel. Press Enter. (Note: the channel buttons at the bottom of the side panel buttons match the Up/Down arrows of the remote. The Source button on the TV is the Enter key.) Press Enter again and use the Up/Down arrow keys to highlight your country. Press Enter. Navigate to Auto Store and press Enter twice. Wait for the TV to go through the channels and test for signal.

You can also add channels manually by using the Manual Store option. If you know the channel number, you would then choose Channel and select C (over-the-air) or S (cable) and then the Right arrow key. Use the arrow keys to highlight the desired channel. Press Enter. Use the arrow keys to select Store and press Enter again. Otherwise choose Search. Use the Up/Down arrows to select a channel. Press Enter, go to Store and press Enter again. Repeat this for each channel.

The manual for the LE26R73BD is available on the support page: https://www.samsung.com/uk/support/model/LE26R73BDX/FID/ . The current link to the manual is https://downloadcenter.samsung.com/content/UM/200603/20060325173246984_BN68-01007A-00Eng-0302.pdf.

I hope this helps. If you use a set top box with a non-RF coaxial cable output to the TV, the channel option will not be available.

Cindy Wells

Televison &... | 62 views | 0 helpful votes

Not finding what you are looking for?
Proton MS-42 LCD TV Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Proton Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

ray gallant

Level 3 Expert

69884 Answers

Are you a Proton Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proton Televison & Video

  • Proton Televison & Video

Most Popular Question

screen blank showing only different

  • Televison & Video
Loading...