Apex Digital LD3249 LCD TV - Answered Questions & Fixed issues

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary. Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Hi, The Unisar DH900 input uses a 3.5mm stereo audio jack for input, whatever you need on the other end depends on to what you are connecting it to, here are the I/O specs for the Unisar DH900, it should come with various adapters to suit most eventualities, http://www.yourhearing.net/pdf/HC-DH900.pdf

Hi here i have added the link to its manual. download the manual and check the same . http://tv.manualsonline.com/manuals/mfg/apex_digital/ld3249.html www.electro-medical.blogspot.com

check that screws are not concealed by a removable plastic cover

Sounds like main board fault. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Check whether those channels have been skipped. If skipped, get tem back. Refer its user manual for details.

The digital volume control section circuit has the fault. You have to check its main digital board. Might need replacement.

A nasty short somewhere or wrong voltage to set---do not keep plugging it in and tripping the breaker--in fact do not plug in at all until a technician examines it(tell him/her what the issue is).To answer the question here: Dead short on or across the AC voltage line inside the set most likely of primary side of power supply.

Google the model of the remote with "manual" or codes.

need to get in to bios and tweek your EUID. Your computer isnt recognizing your HDMI TV.

It will be marked Var audio out if you have it.

The Comcast Universal remote codes for Apex Digital are:
0748
0765
0767 I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Try some of the buttons on the TV, one of them usually substitutes for enter in a menu. Usually the Input selection button.

Hello
Universal remote codes for Apex TV with AT&T Uverse remote are:
1085, 1111, 1119, 1163, 1256
OK

You can download a user's manual and others from;

http://safemanuals.com/user-guide-instructions-owner-manual/APEX%20DIGITAL/LD3249-_E

Click on the pdf icon on the right part of the page.

You can go into the menu and find the display format and change it. You will see options to display cinema, standard 3:4 9:16 etc. I think you may be able to do it directly from the remote
with ZOOM, PICTURE, DISPLAY.


LD3249
Original Remote

Several conditions predict the televisons experience. First, the tv has been set to auto power on at intervals also simialr as timer or alarm fucntionality. Refer to the user guide to ascertain the means to disengage the features to regular performance. Also, depening on the network televison estsblshed would require contacting support experts.

On uverse i got my apex to program by doing the search of codes. There is a code you can enter then hit a button to sequence through all codes by hitting power i believe. when tv turns off you know you have the right one. I am having the same issue on directv now since it does not have this option.

Hello, thanks for using Fixya.com

The buttons on the side is what we call the control board module, there are other terms for this board.

You will need to change out this board, doing this you hold harmless Fixya.com and its experts from any liability resulting in personal injury or malfunctioned tv.

You can find the part effected from one of these websites.

www.shopjimmy.com
www.partstore.com

You would search with your model number that is on your TV. Some cases you would need a service manual to help guide you to witch screws to take out etc etc.

The issue your having is this little board with the buttons on it. you can replace this board or simply take it into a repair shop where you would be charged a few hundred bucks.


Thanks for using Fixya.com I hope you found this very helpful

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Hello! Sometimes the remotes have trouble programming to the tv. But follow the simple steps by following the link below to run a scan on your remote to get the correct code so that it will work the tv. Hope it helps.

http://www.dishnetwork.com/SupportSection/power-scan-instructions


Becki Barned
DISH Network Customer Service