20 Most Recent Rotel RDV-1040 DVD Player Questions & Answers

if it doesnt read any kind of dvd discs at all it only means you have been rip off. It happened to my sony dvd player that I bought from this website. I tested it and it only reads cd or audio cd. Good thing my couzin fixes electronics, He checked on the lens and it turned out that the lens has been replaced with an audio/cd lens like the one we use for our car stereo. Too bad!!!

Rotel RDV-1040... | Answered on Mar 24, 2010

Hello Fayeshep,

They are indeed beautiful machines...!!

I looked for service and customer contact

See the top & bottom of the ROTEC AU page (below)

Good luck & happy hunting...

Rotel Australia Home Theater Hi Fi and Custom Installation

Rotel Televison... | Answered on May 20, 2017

I think that your TV is having issues and needs to be repaired then. Call a TV repair person then to fix your tv

Televison &... | Answered 4 hours ago

need codes for my remote

Televison &... | Answered 6 hours ago

The remote for the DMR-EZ485v can't change the REMOTE CONTROL (RC1) to RC2. Even when following the instructions above.

Televison &... | Answered 8 hours ago

Some help here. The issue is normally overheating. If it is part of your rental package, contact the supplier for a new one.


Televison &... | Answered 11 hours ago

Do a factory reset!

Televison &... | Answered 12 hours ago

Try looking on the companies official website then.

Televison &... | Answered 16 hours ago

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here. ..

Televison &... | Answered 17 hours ago

The remote should be able to work with the TV.

Televison &... | Answered 20 hours ago

I have seen a video on google about how to get into my settings with not having a remote.

Televison &... | Answered 20 hours ago


Televison &... | Answered Yesterday

try taking batreries out of remote and restarting tv

Televison &... | Answered Yesterday

Not finding what you are looking for?
Rotel RDV-1040 DVD Player Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Top Rotel Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

deton8 von Splosion

Level 3 Expert

3337 Answers

Tom Chichester

Level 3 Expert

55379 Answers

Are you a Rotel Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rotel Televison & Video

  • Rotel Televison & Video

Most Popular Question

rotel dvd player not reading dvd but

  • Televison & Video