20 Most Recent
Vivitar ViviCam 5022 Digital Camera - Page 8 Questions & Answers
How do you download pictures from a vivicam
For fast downloading you have to install vivitar software in your PC. A pop up menu will appear when your camera connected to your PC. Otherwise you can search the directory manually.
I inserted a new 4gb
The 5022 is specified to work with SD cards. Your 4GB card is actually an SDHC card. While it will fit into the slot, it is electronically incompatible and will not work in the 5022. You need to use SD cards, 2GB and smaller.
The sd memory card is
Your
camera uses SD memory cards. On one edge is a slider switch: towards
the electrical contacts is the unlocked position and away from them is
locked.
Unfortunately, the switch is easy to move accidentally
and it's also easy for it to appear to be unlocked when it isn't. Like
any mechanical component it's also possible for the switch to fail.
If
the switch is in the locked position then slide it fully to the
unlocked position; if it's already in the unlocked position, slide it
fully to the locked position and then fully back again. There should be a
soft click at each end of the switch travel, if not then the switch is
definitely faulty or obstructed.
If that fails, then try looking
closely at the switch in both positions to ensure that there is no
debris obstructing its movement, if not then check the electrical
contacts to ensure that they're completely clean and grease-free. Don't
touch the contacts with your bare skin, but if the contacts need
cleaning then a cotton bud (Q-tip) moistened with a little alcohol or
methylated spirits can be used to clean them.
If you still have
no fix, then try a different SD card as yours may have an irreparable
faulty switch. If the card does prove to be faulty then on most major
brands you may be able to return them to the manufacturer for exchange:
I've found that they will often do this on a goodwill basis even if the
card is out of warranty.
If all options regarding the memory
card are unsuccessful, then you have a faulty camera and further
remedies require either a professional repair or replacement of the
camera.
I hope that my answer has been of use and has given you
additional options to fix your problem. Please take a moment to rate my
reply.
I dont have sound when
Hello
OK, unfortunately this unit is designed for primary still camera functions, hence, there is not sound recorded during the video.
You can have a look at the technical specifications
HERE.Hope this can be of help.
Kind regards
Andrea
Memory card locked can't take any pctures
SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
I pushed format on the
Hello
Download THIS.
Download
this free
tool and run it on you card and it should be able to recover all
pictures provided that you have not used the card since formatting. I
recommend using a card reader for this.
After downloading and
running (no installation required) , simply select deep scan and your
memory card and it will start scanning, To recover a found file , right
click it and select save.
Please note that the file names will
probably not be available and also that some of the properties of the
photo like date taken could be lost.
Please let me know when you
have recovered your pictures safely or contact me if you need further
assistance.
Regards
Andrea
My daughter has a vivicam 5022 and when i put the
SD cards have a slide switch along one edge. The position nearest the contacts enables writing, the opposite position protects or locks it. Try sliding it fully to the locked position and then fully to the unlocked position. If that doesn't work, try a different card.
Vivitar camera, vivicam 5022
Hi,
You can download the complete instruction manual in PDF format by clicking this
link.
- You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/
Hope this solves your problem. Thanks for using
FixYa.
I have no sound from
Hello
Ok, unfortunately the Vivitar Vivicam5022 is a still camera. Hence, there will be no sound on the recordings.
Click
HERE to view the technical specifications.
Kind regards
Andrea
No sound for vivitar 5022 how do it get sound
Unfortunately you can't. The ViviCam is designed primarily as a still camera, with some video capabilities grafted on. Those capabilities do not include audio. You can add a soundtrack using video-editing software on a computer, you just can't record one on the camera.
I know that isn't the answer you wanted to see, but there it is.
How do i tranfer picures from my camera to the
simple steps to do.
1. insert the usb cable in your pc.
2. connect the camera.
3. if youd have software much better. or
4. locate your file using your windows browser. or
5. follow the pop up auto play on the screen. usually a wizard.
How do i work the sound on my vivicam 5022
This probably isn't the answer you wanted to see, but the V5022 does not record sound with its videos. You can add a soundtrack with video-editing software on a computer, but you can't record one on the ViviCam.
I just bought a new
The most common problem with cameras that will not recognize or use sd cards is that the card type is incompatible with the camera.
By this I mean, there are two flavors of sd cards: SD and SDHC (high capacity).
The cards look identical, except for the 'SDHC' designation on the high capacity card.
Some devices (most devices that weren't manufactured in the last year or 18 months or so) will not read or write to an SDHC memory card.
I have had this frustration myself.
I hope that helps.
Not finding what you are looking for?