20 Most Recent Kenmore 24 in. 17262 Built-in Dishwasher - Page 9 Questions & Answers

Here is the Kenmore support page. Kenmore Customer Care Customer Service Information Here is a manual for a variant. Maybe it will help if you come up short via customer service: https://archive.org/details/Kenmore_630.13952_Dishwasher_User_Manual

yes, depending on the age it may a better choice to buy new one Sears is gone

There is a pump specifically for pushing the water through the spinning arms of the washer. It's a pretty common problem with Kenmore machines for that pump to die (according to my repairman). It's easiest (if you can call it that) to pull the machine out of its hole in the counter by disconnecting the drain and water feed hoses, probably lowering the adjustable feet just a little, and tipping it on its face to work on the pump which is under the machine. Sears Parts Direct will have the part. Other places carry them as well since they are used in a variety of brand name machines, so check around for price.

A thermal fuse is a safety device for high amperes due to high temp and it will cut out when a short circuit applied and the moisture is one of a short circuit.

Look at the control panel and you will see a button that says "Cancel" and "Drain" Press the button after the wash cycle has completed and the machine will drain completely.

I have a Kenmore dishwasher and it doesn't drain all the time. I finally realized the best way to get it to drain was to go to the air gap, remove the cap and either I would poke a stick down there to clear the clog or get a cardboard paper towel tube, stick it over the air gap and blow down to dislodge the clog. Once I do that, I press the cancel button on the dishwasher to empty the basin and it works every single time.