20 Most Recent Konica E-Mini Digital Camera Questions & Answers


Here is a link to the manual with an instruction how to download the driver.

7 Installing Software Konica Minolta mini User Manual Page 12 of 17

Konica E-Mini... | Answered on May 24, 2017

Dear i would have your Konica E-mini driver for windows xp.
i hope you have satisfied my suggestion.


Konica E-Mini... | Answered on Feb 15, 2010

I guess konica does not provide drivers for Xp
but its got driver for older versions.
here ,worth a look.it might work for xp.
follow this link

Konica E-Mini... | Answered on Jul 31, 2009

sir how are you i have a e mini camera but i have no winxp driver so sir plz send me my e mail address = [email protected]

Konica E-Mini... | Answered on Mar 18, 2009

If undamaged, with a fully-charged battery and the correct recording media - probably.

This answer also applies to your other queries, although as it was last produced in 2004, you will be unlikely to be able to obtain a new one.

Konica Cameras | Answered on Jul 10, 2019

Try Googling (Konica)(FX700)(manual) without parens.

Konica Cameras | Answered on Apr 15, 2018


the following memory types are supported byt your camera
SD (Secure Digital) Memory Card / MultiMediaCard (MMC) / Memory Stick / Memory Stick Pro

Do you have a card reader on your computer? We could format the card on the computer and then see if it works with the camera.

Can you tell me the size of the sdcard?

To format the card on your computer plug it into the reader, open my computer and find the card from there, ones you have found the right one from my computer right click and select format, Try formating the memory card to fat 12 or 16 and then when the format is complete insert it into your camera again.

(turn off the camera, insert the card, turn the camera on)

If the memory card still doesn't work plug it to the computer again and this time format it to fat32.

If this ia new sd card with alot of storage do you have a smaller card that already works on the camera?

Konica Cameras | Answered on Apr 13, 2009

OK Here's the problem and the fix ................... After removing the front cover (six screws) and carefully removing it you will find that the front thin metal cover has a plastic inner section that contains the slider mechanism. The plastic bit is attached to the metal cover by two or three strips of double sided adhesive tape and is a real b*st*rd to get apart, but this is what you have to do, so gently but firmly prise them apart, I raised one end with a watchmakers screwdriver and then used a 20 thou feeler to "cut" through the tapes, which can be reused on reassembly.

Once apart it is obvious how the thing works and the problem was seen to be a return spring that had slipped out of position. Using a large needle this was repositioned so that the cam returned to the "off" position. Reassembly is simply a reverse of this procedure.

The malfunction was caused by a few grains of Australian sand (last week only!) jamming the cam causing extra stress on the spring which jumped out of it's position - and here I mean a spring that is at best only three mills long! A magnifying glass helps.

If you can't work to very fine detail better leave it alone .................. All the best


Konica Cameras | Answered on Nov 24, 2008

remove the camera battery for a while to reset the system..

if you had a problem on the lens, this would be a hardware problem and you need to bring to authorized center.

let us know more info regarding this problem. an additional input is greatly appreciated...


Konica Cameras | Answered on Nov 06, 2008

Not finding what you are looking for?
Konica E-Mini Digital Camera Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Cameras Experts


Level 2 Expert

43 Answers


Level 3 Expert

13434 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Konica Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Konica Cameras

  • Konica Cameras

Most Popular Question

driver konica e mini

  • Cameras