20 Most Recent
HP RF823AA#ABA Headset Questions & Answers
I need a headband for my headset
The only place you will find replacement parts is from the manufacturer. That is a high end assembly go directly to HP check on price and availability. If it's a current model HP might be able to provide the parts.
Usually they won't be available because HP wants to sell you a new product to replace it with. Try for those parts anyway.
The mic play back sounds deep and muffled
Its set too loud and the mic is way to close to your mouth. try seeting the boom mic about 2inches from your mouth!
It's a matter of experimenting with mic placement to get the best results. (If it'sd not a new unit, make sure that the microphone holes underneath the windsock aren't blocked up with debris!)
Good Luck
Connecting with pc
You have to put the headphone in the discovery mode. The instructions for the headset will tell you how to do that.
12/6/2016 4:39:50 AM •
HP Radio...
•
Answered
on Dec 06, 2016
How to wire a fridge thermostat
Wiring a fridge thermostat typically involves connecting the thermostat to the power source and the compressor. Here's a general guide for wiring a 3-pin thermostat:
- Identify the Pins: The thermostat will typically have three pins labeled 4, 6, and 3.
- Connect the Power Source: Pin 4 is usually the common (C) terminal, which connects to the power source. This could be the live wire from your electrical supply.
- Connect the Compressor: Pin 6 is often the normally open (NO) terminal, which connects to the compressor. This allows power to flow to the compressor when the temperature rises above the set threshold.
- Ground Connection: Pin 3 is commonly the ground (GND) terminal. This should be connected to the ground wire for safety purposes.
4/19/2024 7:20:26 AM •
Radio...
•
Answered
on Apr 19, 2024
Not finding what you are looking for?