20 Most Recent Aiptek Action HD GVS High Definition Camcorder - Page 2 Questions & Answers

Hi.

Ensure that the cable is running from AV-Out (not in) on TV to AV-In on camcorder, or the whole thing will not work.

If that is not the problem, try the following:

1. Turn off TV and camcorder.
2. Disconnect TV power cord.
3. Remove and put back camcorder battery.
4. Start the camcorder.
5. Connect AV Out on TV to AV in on camera. Some TV does not have AV out.
6. Connect TV power cord and restart TV with the camcorder attached.
7. Check if camcorder LCD display is showing the picture.
   

If that does not work, try switching the camcorder settings between QVGA and VGA, test a different cable, and if possible, test the output from a DVD or a game console.

Regards.

My AIPTEK 1080p was powering on but the screen was turning off within one second of turning the unit on. I verified that the camera was still working and just the output onto the screen failed. I was able to resolve this by hooking the camcorder up to the TV and viewing the menus on the TV and then turning the camcorder off with the power button. I think this problem happened because I didn't do a "clean" shutdown the last time I had my aiptek hooked up to the TV. It is now working perfectly!

My Sansa e260, came refurbished with no program for it. I just downloaded one, but now my computer will not show me the contents of my Sansa? Is there a better way to get a program for my Sansa? I'm just incapable of removing/adding music to it at the moment, and it's frustrating!

I have been researching this camera to decide whether to buy one and other people have said the same thing. The run time is very limited. New batteries will get you 10 - 15 minutes and that's it!
I don't think I'll be buying one....

how do i down load video on to pc

We are very sorry all for that.
Please write an email to [email protected] so they will advise you further.
Thanks.

Hi,

If your camera has the AV in jack then you must be able to record through it. Please let us know the exact model number so that we can provide more specific information.

Thanks.

Make sure evrything is plugged in especially at the power adaptor as these can un-plug there as well. Hopefully your problem is at the adapter and the unit fails to make power in order to charge. I would test the a/c adaptor or try a known good one and hopefully your troubles stop there. Bad batteries can give this thing a beating and fail it.

Never mind. The camera came with both composite and component cables.

Try taking the memory card out the turning it on and if it does just put the memory card back in and it should work.

Hi,
Click Aiptek Support to download required driver.
Please select DZO-V58 model and download driver file.

Hit "add a comment" button for further query / info.
Thanks.

Y PAY WHEN U GET FREE here u go download this manual of ur model DZO-V50 actually

Pls rate me FIXYA for my help

http://www.goaiptek.com/manuals/manual-isdv2.pdf

I have the same problem

Hi, which type of system you use ? if your computer is not equipped with the requirement, this will not work properly,

https://search.yahoo.com/search?fr=mcafee&type=E210US1494G91826&p=my+ac-30+Moultrie+trail+cam+says+it+is+busy+and+won%27t+take+pictures This site has several may help with your problem

All question need 'make model (what it is) as first 3 words please. https://www.google.com/search?q=sdr-b853009+reset All answers can be found on Google. ..

I would check the IR lamps work on the front of the camera.

Depends on what type of camera but this site may help you. https://www.instructables.com/Fix-JVC-GR-DV800U-Camcorder-Error-Messages-E01-E02/