Sanyo Xacti VPC-CA 9 Flash Media Camcorder - Answered Questions & Fixed issues
Do u have an english
You can download the manual from the manufacturer's web site at
http://us.sanyo.com/dynamic/extranet/servicers/VPC-CA9_OM_English.pdf
12/7/2012 6:06:33 PM •
Sanyo Xacti...
•
Answered
on Dec 07, 2012
•
206 views
Hi I have a new
I have the sam camcorder. It has the same problem. When you press the on/off button, it does not do any thing just red light blinking on the top. After wandering with buttons without really knowing what I am doing, I took it to Sanyo service center. They found the ribon connecting the LCD to main body being damaged. They replaced it and charged me $75 for that. After that the camcorder works good. I saw the ribon is very vulnerable. If you twist the camcorder just a little hard, that ribon may get shocked.
8/15/2010 5:36:44 AM •
Sanyo Xacti...
•
Answered
on Aug 15, 2010
•
1,073 views
Problem with memory card
What model Sanyo camera? What type and size memory card? Just what problem are you encountering? Is there an error message?
10/15/2013 10:53:57 PM •
Sanyo Xacti...
•
Answered
on Oct 15, 2013
•
141 views
Hi i have a sanyo hi 8 camcorder 25 plus years old and it loads and ejects and tape flashes continually whats the oroblem
It sounds like your Sanyo camcorder may be experiencing a problem with the loading or ejecting mechanism. This could be caused by a number of issues, including a damaged or broken cassette mechanism, a malfunctioning loading or ejecting motor, or a problem with the camcorder's control board.
To troubleshoot the issue, you could try the following:
- Make sure the camcorder is clean and free of any debris or obstruction.
- Check the cassette for damage, such as broken or bent spindles, and make sure it is properly seated in the camcorder.
- Try using a different cassette to see if the problem persists.
- If the problem persists, you may need to have the camcorder repaired by a professional.
Keep in mind that due to the age of your camcorder, it may be more cost-effective to purchase a new one rather than repair the old one. However, if the camcorder has sentimental value or is no longer in production, repair may be the best option.
1/2/2023 6:16:38 PM •
Sanyo Video...
•
Answered
on Jan 02, 2023
•
83 views
Sanyo VM-D66P error: CASSETTE
There is a pulley that breaks inside but as these have been obsolete for over 20 years, I doubt it is repairable any more.
Fully working VM-D66p for £30 on amazon or fleabay.
2/3/2022 1:35:20 PM •
Sanyo Video...
•
Answered
on Feb 03, 2022
•
166 views
How do i download internal memory
Probably either format the card or insert a new card - if the former, be sure to save the contents to your computer before formatting it !
1/1/2016 9:16:51 AM •
Sanyo Video...
•
Answered
on Jan 01, 2016
•
64 views
SANYO VIDIO CAMERA SHOWS "DEW" DAMP INDICATOR
Seldom have I seen these go on that it was a "false alarm" - usually there is some kind of dampness inside. Try setting the camera in a MILDLY warm place, opening up any doors/port covers it has. As for a sample of a mildly warm spot, I have used my cable box to dry things out before. It runs around 100 degrees F, not hot enough to damage anything. Note, of course: Never put anything dripping wet on something like that. And make sure you don't cover more than a small percentage of any vent holes on the item supplying the gentle warmth.
The main thing is be PATIENT. Don't expect the problem to be solved in 5 minutes. Put it there in a gently warm spot and check on it in the morning. Once thoroughly dried out, it should stay that way with reasonable care.
7/8/2015 11:57:16 PM •
Sanyo Video...
•
Answered
on Jul 08, 2015
•
75 views
Not finding what you are looking for?