20 Most Recent Kenmore 24622 Top Load Washer - Page 5 Questions & Answers

0helpful
1answer

Cubic feet of a kenmore elite front loader

According to https://www.kevinssuperstore.com/preowned_appliance.php?id=11750 , the Kenmore 796.41022900 has a 4.2 cu. ft. capacity. I hope this helps. Cindy Wells
10/13/2022 11:24:30 PM • Kenmore Washing... • Answered on Oct 13, 2022
0helpful
1answer
0helpful
1answer
0helpful
1answer

Hi own a Kenmore Type 111, Model 110.25652400, Serial # CS1013360 washing machine

Those parts are very common and cheap to buy. The problem is your model number isn’t correct. Leave out you serial number and re-check the model number. When dog agits go bad, the bottom half of the agitator should still work.
10/8/2022 2:13:36 AM • Kenmore Washing... • Answered on Oct 08, 2022
0helpful
1answer

Top load washing machine will not agitate

You may need to replace the agitator cogs, aka "dog ears". They allow the agitator to work in a ratcheting motion. I have a different washer but have had to replace mine several times. They are plastic and just wear down.
10/7/2022 12:33:54 AM • Kenmore Washing... • Answered on Oct 07, 2022
0helpful
1answer

Old Kenmore chest freezer will not get cold i checked everything it all has continuity but will not cool,

Hi, you were smart to use youtube tutorials for this. If that information and the information from your manuals hasn't helped the fridge start cooling, then I would recommend setting up a service appointment with Kenmore by calling 1-800-366-7278. Thank you.
10/6/2022 9:23:57 PM • Kenmore Washing... • Answered on Oct 06, 2022
0helpful
1answer

My kenmore elite washer had code OE , what do i do to fix it? ive checked drain hose its clean n clear so far and drained water.

The OE (outlet error) can also be caused by a damaged drain pump, something blocking the impeller of the pump, or a clogged filter before the pump. You'll need to add a comment with the model number (including the three-digit prefix) if you want information on how to access the pump section of the washer. Kenmore washers are made by several different manufacturers. Thus the design will differ. I hope this gets you started. Cindy Wells
10/4/2022 12:50:10 PM • Kenmore Washing... • Answered on Oct 04, 2022
0helpful
1answer

Kenmore 800 washer model 110.28842700 fills up with water but won't start

Hi, please test different modes of the washer in order to see if the no-start issue is present in all of them. You might just have to twist the dial slightly in order to get the machine to start washing. This happens sometimes with washers after a period of time of use. Thank you.
9/27/2022 1:28:08 AM • Kenmore Washing... • Answered on Sep 27, 2022
0helpful
1answer

What does LE display mean on my Kenmore front loading washer?

LE indicates that motor was locked. The load in the washer was too heavy for it to spin safely at the usual speed. This could be from too many items in the washer or that something is wrong with the washer rotor hardware. First try resetting the washer, turn off the machine and unplug it (or turn it off at the circuit breaker). Then press and hold the start/pause button for 5 seconds. (This drains the capacitors that hold the error code in the control panel's memory.) Try running the washer with it empty. If the LE error continues, you need to check the rotor and the rotor position sensor. You may also need to check that the tub is properly balanced and the wiring to the control panel. To access the rotor, unplug the washer and disconnect the washer hoses. With help, place the washer on it's back to access the rotor and the rotor sensor. You'll need a 17mm socket (or an adjustable wrench and a hammer) to loosen the rotor mounting nut. Replace a damaged rotor or sensor. Check the wiring harness to the sensor and make sure that there is no corrosion either at the sensor or the control panel connection. Check the wiring for continuity on all of the pins. Replace damaged wiring. Please add a comment with the washer model number if you need a parts diagram. I hope this helps. Cindy Wells
9/26/2022 11:12:01 PM • Kenmore Washing... • Answered on Sep 26, 2022
0helpful
1answer

Kenmore he2 front load f22 error code. Replaced door switch nothing changed

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjH8PvW0rL6AhUTADQIHdAnB18QFnoECAgQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fsupport%2Ft8634289-notice_f22_error_message_washer_door&usg=AOvVaw0haNbSuss9gAb_F_c-GEKC
9/26/2022 2:16:48 PM • Kenmore Washing... • Answered on Sep 26, 2022
0helpful
1answer

Noise at the very end of spin cycle - Washer KENMORE 70 series

Hi Susan, This can be so many things, could be because the clutch assembly might be worn out but also an item caught in the seal or between the drum and the casing or an unbalanced load. Thanks Dave, JustFixed.co.uk
9/23/2022 12:15:11 PM • Kenmore Washing... • Answered on Sep 23, 2022
0helpful
2answers

What does LOC mean on kenmore elite washer ?

Press the Options and Select buttons at the same time and hold for 3 or 4 seconds to unlock the control panel. Best Wishes
8/30/2022 6:56:08 PM • Kenmore Washing... • Answered on Aug 30, 2022
0helpful
1answer

Why is my washer spinning instead of agitating?

Check your cogs. Pull the top off agitator off and look inside. Depending on model has different typed of cogs that slide and catch when working properly. The do wear out. Also known as "dog ear cogs". Very cheap parts. $2.
8/29/2022 6:03:20 PM • Kenmore Washing... • Answered on Aug 29, 2022
0helpful
1answer

Kenmore 'Style Master 909278' Heavy Duty washer and Dryer. It fills up but leaking from underneath.

The leak is likely to be from the bottom hose to the circulation pump. Pull the machine out and lean it back against the wall. Have someone steady it as you look underneath,
8/28/2022 4:25:47 PM • Kenmore Washing... • Answered on Aug 28, 2022
0helpful
2answers

Kenmore washer won't Fill on Cold or Warm water settings.

There might be an issue with the house water supply for the washing machine that needs to be repaired or replaced or the hose could be clogged or needs to be replaced.
8/28/2022 2:09:11 PM • Kenmore Washing... • Answered on Aug 28, 2022
Not finding what you are looking for?
Kenmore 24622 Top Load Washer Logo

36 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

vince

Level 3 Expert

1527 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Washing Machines

  • Kenmore Washing Machines

Most Popular Question

remove agitator from ge mod wwse3160aoww

  • Washing Machines
Loading...