20 Most Recent
AudioBahn A2200HCT Car Audio Amplifier - Page 5 Questions & Answers
I think voice coil is
The voice coil can be properly checked with a voltmeter. Disconnect the speaker and use the OHM setting on the meter to check to see if it measures around 4 ohms. Is this speaker a subwoofer? Some subwoofers will be rated at 2 ohms. Either way, any speaker should have a sticker or stamp on it telling what the impedence is. Typically, most speakers will be either a 2ohm or 4ohm measurement. If the coil is bad, you will either get no reading or one that is much higher than the 2ohm or 4ohm. Hope this information is helpful.
Best way to wire the
Well, from what I can find, the best you could do is 2 ohm stable. This is only if you have a decent 2 ohm stable amplifier. In order to wire it to 2 ohms you will need to take the positives and hook them together and run one wire to the brigde positive of the amplifier. Then take the negatives and hook them together and run one wire to the bridge negative of the amplifier. Make sure you have a good enough amplifier to run this sub also. I would definately use a mono block amp that is 2 ohm stable and at least 1000 watts. I'm not sure if you have the 10",12", or 15" but 1000 should do it. There is one key that many people miss.......it is just as bad to underpower subs as it is to overpower them. And make sure you get a quality amplifier....if it is a brand new 1000 watt amp and it is under a hundred dollars you are not getting a good amplifier. Amps that I would recommend getting are gently used high end amplifiers, namely Memphis. I'm sorry I've rambled enough, but if you need anymore help just let me know. Good luck
I have 2 audiobahn 12
If each speaker only has ONE negative and positive terminal, then its about 95% likely that they are 4 ohms.
If each has TWO sets, then you will have to m,easure it with a DMM.
Audiobahn car amplifier
Sounds like you have fried your output transistors. They can be replaced if u have the patience and know-how. Also check the resistors near the transistors. Some of them may need to b replaced too. I fu replace the transistors and the resisitors are still fried, u run the chance of burning up the new transistors again. I usually just replace both items since it's not that expensive and I'm doing the labor. What have you got 2 lose?
I took my cd dvd
HI,
I am sorry to say this but you eill have to contact your dealer for the code.This is the only way to fix the problem..
Sub repair
Well actually you can repair it your self with geat ease i may add,,
actuall all that can go in the speaker is the coil.. Yep the coil thats all
You will need a coil for it, a dust cap and the cone.
1.) using a knife, cut the cone off
2.) ulsolder the coil from the speaker
3.) resolder the new coil
4.) firmly fit and glue the coil to the new cone
5.) glue the cone to the metal edges of the speaker
6.) glue on the dust cap..
7.) have a beer your done..
You can get the parts at any local electronisc shop, I'd recommend you cut the cone and the coil off and take it with you when buying parts.
Repair, Replace
Fixing them isn't worth it just purchase some new 6x9's for less.
Help with code radio for my nissan pp2787h
The radio code is a security feature that's meant to deter theft, and it's unique to each vehicle. If you've lost your code, you'll need to contact a Nissan dealership or service center and provide proof of ownership. They should be able to help you retrieve the code. Please do not attempt to use codes from the internet as incorrect attempts may lock your radio.
Is there bluetooth on nsdn-w59
I have the same radio now with no Bluetooth am trying to get Bluetooth on it too without having to buy another radio. Please help.
No sound from wireless headphones in a toyota sienna
First thing to do is check to make sure that the batteries are properly charged.
Second, make sure that you have a clear line-of-site to the IR transmitter. Infrared (IR) works the same way that your TVs remote control works - if the signal is blocked, then you will not hear any sound.
Third, make sure that you are in the rear seat of the vehicle when listening to the sound. The IR transmitter only transmits to the rear seat, so you will not hear any sound if you are sitting in the front seats. This is a common problem that i see.
Lastly, make sure that the heapdhones you purchased are compatible with your 2006 2007 2008 2009 or 2010 Toyota Sienna. Remember that some older models require RF headphones, not IR headphones. I checked http://www.audiovideo2go.com for compatibility before I purchased my headphones. They have a useful listing of all the headphones and models of vehicles they are compatible with.
Not finding what you are looking for?