Saitek Cyborg Mouse - Answered Questions & Fixed issues

if not usb ports or the plug itself something failing /over heating internally in the mouse is this the r.a.t.7

Can you give some more info please.

Do all the mouse functions still work?
It may just be the connection to the led's.
If it is working ok, is it worth taking it to bits to try and get the lights to work? Its up to you

You mentioned that it takes about 8 clicks before it react. This could be the mouse' hardware defect.

Try to use the mouse in a different computer. If same problem occur, then the right click button is defective. It could be loose and needs repair.

Thank you!

http://www.saitek.com/UK/PROD/cyborgmouse.htm

you will see a download option at the top of the webpage, select drivers and follow the instructions from there.

alternatively google: saitek cyborg mouse driver download

waht is your real problem.

Request the instructions from Saitek.

Maybe try here: http://drivers.downloadatoz.com/vendor_ite/saitek-p150-pad/os_windows-xp.html Although that driver is for Windows XP.

Software issue. Use a newer joystick and all will be fine.

All the manuals and drivers are on the Saitek Website, very easy and straightforward to find and download what you need. Just make sure it's plugged in to a USB port.

Isn't the panel support within the flight software itself? In which case it would be either in options or preferences. Saitek's software downloads are basically for controllers.

You can download and "File/Save As" to your Documents folder from here... http://www.manualslib.com/manual/143531/Saitek-P2500.html

Since it isn't officially supported by windows, you'll have to use 360 emu or xpadder. Or many other alternatives, Use google, good luck.

the x52 drivers are problematic to begin with... ...but sounds like your computer is trying to boot on that device (as a primary/usb/H.D.) you either need to edit your boot options or reset the devices accordingly in your bios... if your not familiar. . .DONT EVEN BOTHT...cuz you could wind up doing more harm than good ...tampering with your bios is tricky business (that even some of 'US' big boys have fried some processors, boards and even drives...!!! lol) so my honest advice to you if you're uncomfortable and unfamiliar with editing your system files (regedit/sysedit) &/or bios...ask a friend?! best of luck...

a pin maybe broken or wire clipped of

Hi,

You can download the manuals from this link:

http://www.saitek.com/manuals/dvdmanuals.zip

There are several models... 310, 510, 610

Can you tell me which one she had?

open it up and re solder with a cheap solder gun or take it to a technician to get it resoldered

Here are some codes for the remote saitek 3001,3002. sony 3021,3022,3023. you press and hold the SETUP button for 1 to 2 seconds then you put the code 3001 or what will work the light will turn then when you put the code in if it works it will turn off then try the remote.