Top 20 Kenmore 98702 Stacked Washer/Dryer - Page 4 Questions & Answers

go to www. repairclinic.com and look for the part, give you model, etc.and buy it.God bless you

What is the model number of the unit?Look under the washer lid or inside the dryer door.

Model# 110.88752799 Kenmore stacker washer/dryer Q; How do I remove the front control panel? (to remove the timer dial, to replace a switch, etc) A: reference diagram- http://www.searspartsdirect.com/partsdirect/partsdirect/printSubComp.pd?imageUrl=http%3a%2f%2fc.searspartsdirect.com%2flis_png%2fPLDM%2fK1105180-00001.png -remove four crews (#8 on diagram) from left and right sides. -remove one screw (at #21 on diagram) from the bottom of the panel. -remove #7 panel from the left and right side - this will expose a thin metal catch (#9) on each side. With a small finger or screw driver, push down on the top of this metal strip where it bends horizontally. This will compress the spring (#14) and release the catch. - the control panel will fold down now. http://www.searspartsdirect.com/partsdirect/partsdirect/printSubComp.pd?imageUrl=http%3a%2f%2fc.searspartsdirect.com%2flis_png%2fPLDM%2fK1105180-00001.png

The water inlet valve is stuck shut and will need to be replaced. Here is the part you need.

If your dryer isn't drying, check for a simple fix first. Make sure the dryer is set on a high heat setting, empty the lint filter, and reduce the size of the load by taking out some items. Also, check to make sure the clothes are not dripping when you put them in the dryer and make sure a dryer sheet is not blocking the vent. It could also be a problem with your dryer not being level or the vent hose is clogged. For more tips and solutions, check out these troubleshooting steps in Dryer not drying.

You are overfilling the unit, these are designed for smaller loads. I have seen this many times.

welcome to: http://www.netetrader.com The website wholesale for many kinds of fashion shoes, like the nike,jordan,prada,****, also including the jeans,shirts,bags,hat and the decorations. All the products are free shipping, and the the price is competitive, and also can accept the paypal payment.,after the payment, can ship within short time.free shippingcompetitive priceany size availableaccept the paypalhttp://www.mineokmalls.comjordan shoes $32nike shox $32Christan Audigier bikini $23Ed Hardy Bikini $23Smful short_t-shirt_woman $15ed hardy short_tank_woman $16Sandal $32christian louboutin $80Sunglass $15COACH_Necklace $27handbag $33AF tank woman $17puma slipper woman $30http://www.netetrader.com

sounds like the pump failed, its always worth getting repair price first as could be as little as 40 or 50 pounds to supply and fit a pump where new machine will cost few hundred.

Belt is stretched/worn out first cause. if not check pully fllanges for ware.

Yes you can. Green in the middle and red and black to the matching sides coming in from above the block where your connecting the cord If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Check for spares from:www.espares.co.uk

your pump seals are bad,this is a cover to keep the pump dry if something up above leaked,but from the pics it looks to be the pump especially with all the water leaking,just replace the pump unit

the pump is plugged up with foreign material and shutting down the unit,remove rear cover or lower front cover to access the pump and remove hoses to clean it out

Thermostats/thermal-fuses in back of dryer, usaully 2 of them, call a local appliance supply place, should be able to supply them. if electric 220volt, 1 side is 110v for heat otherside 110v is the motor, timer, light, ect.

You need to determine where the water is leaking from, it could be the door seal, the drain pump, the soap powder chamber, the rear main seal, drain hose almost anywhere. if you can figure out roughly where it's coming from we may be able to offer advice.

Hello there Brian and welcome to fixya Slow drying is a fairly common issue with dryers that are a few years old the most commmon problems is due to the following Please check each one of these very close okVent Frequently there's an obstruction in the vent duct from the dryer to the outside of the house. For the dryer to heat properly, the duct must be clean and clear of lint or any other substance. Heating element Your dryer's heating element may be partially burned out. If it is, your dryer still heats, but at such a low temperature that it takes three or four times as long to dry the clothes. If the element is partially burned out, replace it. To determine if the heating element is burned out, watch the part testing video at the bottom of this page. Internal ductwork Your dryer has some internal ductwork. If it gets clogged, your dryer can't dry properly. In most dryers, to get to the internal ductwork to clear the clog, you have to substantially disassemble the dryer. A quick way to check for internal clogs is to remove the lint filter and use a flashlight to inspect the inside of the duct. If it looks clogged and you can't clear it using your vacuum, contact a qualified appliance repair technician. Cycling thermostat Although this isn't a common problem, one of the thermostats that controls the temperature in your dryer may break and cause the dryer to heat poorly. If so, you need to replace it. The thermostat is usually a small, round, black device mounted to an oblong steel plate. The plate is mounted to the internal ductwork with two screws.

Turn it off!! Now!! there should never be sparks in a washer or dryer. Get a qualified electrician to check it out before you power it up again.

could be the bearing need changing

Service manual If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Service manuals are not often available to the public but enter your model number at the link below and Sears may have your machine in its library. If it does, you will have good illustrations of all parts and be able to order those you need through that page.Sears parts dept..