20 Most Recent Kenmore 98702 Stacked Washer/Dryer - Page 2 Questions & Answers


Dump the appliance. sears delivers the worst garbage available

Kenmore 98702... | Answered on May 15, 2016


The wiring diagram is located in the slanted panel above the washer door

Kenmore 98702... | Answered on Mar 22, 2016


My Kenmore 98702 washer Fills and agitates as expected but stops at the end of cycle failing to drain or spin

Kenmore 98702... | Answered on Jun 23, 2015


Maybe it cause a too tied belt.

Kenmore 98702... | Answered on Jun 09, 2015


The water pump could be stuck, or broken so the pulley on the pump is not spinning, while the belt is, which gives you the burning smell. Could also mean the motor is overheating giving you the burning smell. You will have to open the back and observe whats happening while its running. Just keep your hands clear while its working.

Kenmore 98702... | Answered on Feb 16, 2015


Hi
You'll need to find some one who can read the wiring diagram.
The best bet would be to call a repairer who specialises in your brand..
I've had to walk away from jobs which some one else has started, so don't say that someone has started to 'fix' it or they may refuse to work on it.

Good luck
Nomess

Kenmore 98702... | Answered on Feb 09, 2015


Correct the wiring. Manuals are available on line. You need to get somebody that can read the diagram.

Kenmore 98702... | Answered on Jan 28, 2015


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101
................

Kenmore 98702... | Answered on Dec 02, 2014


can the rear bearing on the drier be oiled/greased though the back casing, any easy way of stopping sqeek!

Kenmore 98702... | Answered on Oct 11, 2014


I don't know where you have your washing machine but can't you just put the drain hose in the tub, or toilet to see if it drains? if either of those aren't close enough to dump discharge water into from your spin cycle, you may be able to add a short piece of clear tubing at the end of the existing hose using whatever connector you need to use, then put the hose back into your drain. This way you should be able to see if the pump is working. You can usually hear/feel water being discharged out of the discharge hose but I don't know what your situation is.

Kenmore 98702... | Answered on Sep 02, 2014

Not finding what you are looking for?
Kenmore 98702 Stacked Washer/Dryer Logo

1,103 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Paul Carew

Level 3 Expert

3527 Answers

Nicola Conroy

Level 3 Expert

1428 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Washing Machines

  • Kenmore Washing Machines

Most Popular Question

washer agitates but will not spin

  • Washing Machines
Loading...