20 Most Recent JVC KW-NT1 Car GPS Receiver Questions & Answers

Probably the gps antenna is not working due to rusty (water inside it). Check the antenna disassembling it. Third part antenna for the NT1 is not available due to proprietary connector so you must buy a (expensive) genuine new one from JVC. Sometimes it's possible repair the old one.

JVC KW-NT1 Car... | Answered on May 21, 2011

You will be able to handle phone calls (answer, reject, hold, etc), and import up to 100 numbers from your phone's contacts database. First of all, you must pair them with each other. Go to 'Menu > Settings > Phone tab > Connect > [New Device]'. Your device is in paring mode now. Then, make your phone's bluetooth application search for new devices. After a little while, KW-NT1 should appear on the phone' screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros). If the pairing process is successful, you should see 'Connected' on your Car GPS receiver. Press 'OK' to confirm the operation. They are paired now. You will be able pair other 4 phones with this car GPS receiver (but connect only one of them at a given time). Now to import some of your phone's contacts database, from any screen, press DISP. When the AV bar appears, press the bluetooth icon, then 'Call Menu > Phone Book > Add', and see your phone screen for the selection of the number you want to import. For each additional number, repear from the 'Add' button. When you are done, press 'Finish'.
You will be able to make calls by dialling a new number, by going to 'DISP > bluetooth icon'. To dial from the call history or the stored phone book entries, press 'Call Menu'.
These are the basic functions. For additional resources on this car GPS receiver's bluetooth implementation, please, take a look at its user guide, from pages #77 to #84. You can download it from this location.
Please, let me know if I can assist you any further.
Regards, Carlos

JVC KW-NT1 Car... | Answered on Jan 06, 2011

Have you tried re-flashing the unit with the latest EU firmware update available from the JVC website? http://www.jvc-victor.co.jp/english/car/support/navi/nt1/eu/index.html Should overide the current firmware then allow you to use UK maps. If it doesn't work you can always reflash it with the USA update.

JVC KW-NT1 Car... | Answered on Mar 29, 2010

If the vehicle can take double-din radio, it can be mounted.
You need to buy harness adapters.

JVC KW-NT1 Car... | Answered on Jan 19, 2010

it might need updated . load the driver an plug it into a pc

JVC GPS | Answered on May 10, 2015

Free PDF Manual at the link below with Wiring & Cable Connections.


JVC GPS | Answered on Jun 11, 2011

why dont you try to save it as disk image(.iso) and load it from the computer , you can do this with several burning sofwares let me know if U have any questions about disc image(.iso) . [email protected]

JVC GPS | Answered on Jan 31, 2011

You can update the GPS devices with simple & latest method For more detail you can visit at Garmin map update.


GPS | Answered on Jul 30, 2020

Not finding what you are looking for?
JVC KW-NT1 Car GPS Receiver Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top JVC GPS Experts


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33328 Answers

Are you a JVC GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular



Most Popular Question

last year got device after 1 amp half

  • GPS