20 Most Recent
Nokia 2600 Classic Cell Phone - Page 8 Questions & Answers
Restriction code for NOKIA 2600C-2
HI
A restriction code is numeric code (password) that prevents a user from accessing certain technical settings of a phone. It is specifically designed to prevent a phone from being reprogrammed to work with a different carrier (service provider).
This is what is usually meant when a phone is referred to as "locked". There are also "unlocked" phones that can be reprogrammed to work with a different carrier.
The reason for this system is the way phones are often sold. Many phones are sold below cost, (at a loss to the carrier,) with the expectation that the money will be recouped in the cost of the monthly service plan. The up-front loss that is later recouped is called a Subsidy.
For this to work financially for the carrier, the user must not buy the phone and then use it with a different carrier. The MSL makes that nearly impossible.
Unlocked phones are ususally much more expensive than locked phones, because there is no subsidy to offset the cost.
You should ask the operator for the restriction code
ENJO! RATE THIS SOLUTION
RNJ VINOD KUM
I need the master code
I need the master code of Nokia 2600 Clasic phone.
Because I have forgot it and can't use the set so far.
Many thanks in advance.
I wanna restart code plz
If you forgot the password or don't know the security code, You have to master reset the phone. Contact your service provider to get a master reset code at free of cost....You can also visit
http://www.unlock-zone.com/ and can see different options there to get unlock code for a price. Choose any price appropriate for you.
My mobile 2600 classic is
I think it is very hard nowadays to recover stolen or lost phones, but one thing you can do is block your phone so that the person who stole it cannot use the phone. All you have to do is call the phone provider. They will get some basic info and the IMEI number of your lost mobile set. They will register IMEI (International Mobile Equipment Identity) of your cell phone and will request all the mobile operators to block this IMEI on their networks.
IMEI is a number which is unique to every GSM mobile phone. It is usually found
printed on or underneath the phone's battery and warranty card. IMEI of any set
can also be found by dialing the sequence *#06# into the phone. The IMEI number
is used by the GSM network to identify valid devices and therefore can be used to
stop a stolen phone from accessing the network. For example, if a mobile phone is
stolen, the owner can call his/her network provider and instruct them to "block" the
phone using its IMEI number. This renders the phone useless, regardless of whether
the phone's SIM is changed.
My nokia 2600 asking for PUK code and saying pin
Inorder tosolve your PUK problem,
*kindly contact your service provider (customer care)
*Tell your phone number and they will give your PUK code
*Enter that code on your cell phone(that ask puk code)
*Then your phone ask another pin code&to verify,there you can type your desired code(say 0000,00000,1234,12345).
* Then your phone will restart normally....
"IF YOU THING MY SOLUTION IS HELP FULL TO YOU,THEN DON'T FORGET TO RATE ME"....THANK'S
Lost security code for nokia 29600
Hello,
the best way to get the unlock code for your phone,is to contact your service provider and request for the unlock code of your phone which will be given to you for free,but you have to prove to them that the phone really belongs to you.
Good luck!!!
Nokia 2700c puk code
You can call the carrier (company whose sim card it is)..
They (and only them) can provide you with thte PUK Code..
Please tell me what to
you do have the possibility to get it restored to factory settings through the below instructions.
http://en.kioskea.net/faq/421-restoring-your-nokia-phone
Such a restore will in fact reset the security code to its original
one that was set by the manufacturer which is normally 12345 or 00000.
If ever it is not the security code that is causing problem, please
provide clear information about which code you are referring to.
2600 display is not working
displays can burn out from being dropped or fluid intrusion you can have the screen repplaced for around $ 60 if you know how to pull it appart you can order the screen on the net and replace it your self these types of screens cost around $30 on the net
Nokia 2600 is asking for puk no. please help
My dear:
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved
But:
Don't try to enter a PUK code without knowing the right one.
You need to call your service provider to get this code.
It can be as many as 8 digits, and it is random. If you enter too many wrong codes,
you can permanently damage the device. So Please You Go to Service office
and Get the Duplicate Sim From Office Oprater Same Your No Problem will Solved
10/19/2010 12:17:48 PM •
Nokia 2600...
•
Answered
on Oct 19, 2010
Unlock phone codes
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
Default 6 Digit Security code: 1122 or 000999
Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved
If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved
Not finding what you are looking for?