20 Most Recent
Biostar TA790GX Motherboard - Page 2 Questions & Answers
Schema ps2 50004
no mobo told , no PC told no problem or goal told.
P/s2 mouse or keyboard? pin outs.?
if you wiki that the answers is here, for sure.
personal system 2, IBM devices?
or sony PS2 play stations.
hummmmmmmmm i vote IBM but I,m jaded.
5/17/2022 5:24:19 PM •
Biostar...
•
Answered
on May 17, 2022
How can i fix slow data transfer to my flashdrive on my biostar mgv-h61 motherboard
redux 1:no drive told maker or model # THUMB told.no OS told XP infected as all are?USB drivers missing on that south bridge>?CPU running at 100% or memory full DDR or hdd source badno source told. (the source too can be slow !!!)_1GBfile to what sized drive not told.yes 4MB/s is slow, but all my none prime grade sandisk do 3MB/s, and is 100x slower than my good sandisk.math:?but 20 minutes is 1200 seconds so is 1200 seconds divided by 1000MB and = 1MB/S math. rounded off.and I can buy 1000s of cheap junk thrumb drives off alibaba , and all are slugs, but were all dirt cheap/to go fast buy fast.try fast drives called Sanddisk.learn that all computer parts like this are sold for speed, to go fast you must PAY MORE.just like cars or boats or air planes pay the man.morehere they are , learn to shop wiserhttps://www.bestbuy.com/site/searchpage.jsp?_dyncharset=UTF-8&browsedCategory=abcat0504010&id=pcat17071&iht=n&ks=960&list=y&qp=maximumreadspeed_facet%3DMaximum%20Read%20Speed~400%20megabytes%20per%20second&sc=Global&st=categoryid%24abcat0504010&type=page&usc=All%20Categoriesgood luck finding causes. try a good drive first.
5/17/2022 5:08:09 PM •
Biostar...
•
Answered
on May 17, 2022
Biostar g31 m7 te 64bit supported?
no OS stated. nor what CPU is in the socket.USA mobo, bought here?there can not a simple answerbut G31 is not supported by intel now. BIOSTAR ENDED ALL LEGACY SUPPORT.64bit what, windows 10" ?xp/w7 yes if biostar allows it.(THEY WENT EOL)no w8no w10no w11
1/22/2022 3:39:20 PM •
Biostar...
•
Answered
on Jan 22, 2022
Biostar A55ML2 Motherboard. Not accepting ram upgrade to 2x8GB DDR3 PC3-12800 1600Mhz.
OLD RAM WORKED, iMPLIED?Not accepting? MEANS BIOS WILL NO ACCEPT IT?OS GOAL,no OS told FAILING AT THE bios LEVEL, TRY RESETTING BIOSDO NOT NOT SWAP RAM WITH AC POWER CORD ATTACHED OR BLOW IT UP YOU WILL, LEAVE THE AC CORD OFF FOR 1/2HOURSO ALL CAPS DISCHARGE FIRST.SPEC: 2013 MADE . BIOSTAR ENDED SUPPORT.Socket FM2 (amd.com ended support)AMD A55 CHIP.2 DDR3 DIMM slots Up to 32 GB Dual-channel DDR3-800/DDR3-1066/DDR3-1333/DDR3-1600/DDR3-1866/DDR3-2133POWER OFF, AC CORD REMOVED, LET IT DISCHARGEFOR 15 TO 30 MINUTEStest old ram first the new.do not mix RAM sku (models)try them all 1 by 1 , in bank 0 channel A slotin sert one the plug in AC power cord lastthen go to BIOS first even have HDD unpluggedand do this bios reset https://www.pcdied.com/cmos.html#Reset_only.see if bios likes each stick if yestry them all (both) at once for 16GB .some modern RAM, do not run on old PC/mobodue to density rules violated;.The chip set must like the DDRthe BIOS too.
1/22/2022 3:37:30 PM •
Biostar...
•
Answered
on Jan 22, 2022
P41bad2 driver
Find drivers with 3Dp chip Software
http://www.3dpchip.com/3dpchip/sub/chip_eng.html
7/17/2017 3:26:33 PM •
Biostar...
•
Answered
on Jul 17, 2017
I purchased a K8M800-M7A Motherboard,
Not sure how u shorted it out installing ram. Theres only 1 way the put it in and there should have been NO power on the board at the time. AND I'd like to know how you think the board is shorted out. What is happening? It's a very rare occurrence and there are other easy fix issues that might make a person think the board is fried. Let me know your answers to these questions so I can help further.
4/13/2017 4:59:37 PM •
Biostar...
•
Answered
on Apr 13, 2017
How I can use transcend 4GB ddr3 1600 RAM instead of 4gb ddr3L 1333 in biostar j1900NH2 mother board
No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)
You would have to increase the memory voltage, this is only possible on full blown gaming motherboards designed for overclocking the memory.
A j1900NH2 supports S states, but it does not support memory overclocking.
12/22/2015 11:32:29 PM •
Biostar...
•
Answered
on Dec 22, 2015
Problem bios
Some idea of your question would be good
2/10/2015 2:02:29 AM •
Biostar...
•
Answered
on Feb 10, 2015
My motherboard is not working
Without you describing the problem it's impossible to suggest solutions, except purchasing another board. 6 months is a lot of time. I would get rid of this motherboard an bought another brand ( Gigabye, Asus are excellent brand names).
1/24/2015 12:28:27 PM •
Biostar...
•
Answered
on Jan 24, 2015
I could not found biostar N68S3B driver for windows 7 ultimate 32-bit os
Hi
I went to the download drivers page of the BioStar website for your mobo here:
N68S3B
and the VGA driver for Vista and Windows 7 is the same one 8.15.11.8634 (the "x86" indicates 32-bit, but the driver looks to be the same for both 32 & 64 bit).
Your question about the AMD Athlon can be answered quite easily. It is a CPU and does not need any specific driver. You should however download and install the chipset drivers for the mobo.
Hope this is helpful, if so would you please register that with Fixya
Cheers
12/24/2014 10:19:47 AM •
Biostar...
•
Answered
on Dec 24, 2014
Auto detection
Does it say after boot up I'm guessing u need to install display drivers but if that doesn't work give me more info please
9/7/2014 9:18:22 AM •
Biostar...
•
Answered
on Sep 07, 2014
Not finding what you are looking for?