20 Most Recent
Kenmore 62872 Electric Dryer - Page 4 Questions & Answers
How to change time settings on a Kenmore series 600 electric dryer
Follow these simple steps:
- Turn on the dryer by pressing the "Power" or "Start" button.
- Use the "Time Dry" or "Timed Dry" button to select the desired drying time. Press it repeatedly to increase the time in one-minute increments or hold it down to scroll through the time options more quickly.
- Once you've set the desired drying time, press the "Start" button to begin the drying cycle with the new time settings.
My Kenmore just stopped while heating something... shows No power... any ideas?
Your Kenmore Dryer has a number of things that can cause this.
Most basic, the house breaker has tripped.
The timer or electronic mainboard has failed.
The element has failed
One of the 3 heat regulation devices has failed or tripped out, one resets itself, the thermal fuse has to be replaced.
'make model (what it is)' in all questions please.
..
My Kenmore dryer 110.68032990 stops running after letting go of start button. Has heat and makes a loud crackling noise.
If your Kenmore dryer continues to stop running after releasing the start button and makes a loud crackling noise, even after replacing the motor, thermal fuse, and thermostats, it indicates that there may be an underlying issue causing the problem. Here are a few additional troubleshooting steps you can consider:
- Check the belt and drum: A worn-out or damaged belt can cause the dryer to stop running. Inspect the belt for signs of wear, fraying, or breakage. Additionally, check the drum to ensure it is rotating smoothly without any obstructions.
- Examine the idler pulley: The idler pulley is responsible for maintaining tension on the belt. If it's worn or faulty, it can lead to belt slipping or snapping, causing the dryer to stop. Inspect the idler pulley for any signs of damage or wear.
- Inspect the motor pulley: A loose or damaged motor pulley can also cause issues with the dryer's operation. Make sure the motor pulley is securely attached and not wobbling or damaged.
- Check for obstructions: Clear out any lint, debris, or obstructions that may be present in the dryer's exhaust vent or air intake areas. Buildup can restrict airflow, leading to overheating and causing the dryer to stop.
- Consider electrical issues: A faulty electrical connection or wiring problem could contribute to the dryer's behavior. Check the power cord, outlet, and circuit breaker to ensure they are functioning correctly.
If the issue persists after attempting these steps, it's recommended to consult a professional technician who specializes in appliance repair. They will have the expertise to diagnose and resolve complex issues with your Kenmore dryer.
I have a kenmore he5t dryer. I think the start button is bad. What is the fix?
If you suspect that the start button on your Kenmore HE5T dryer is faulty, there are a few steps you can take to address the issue:
- Confirm the problem: Before assuming the start button is the cause, check if there are any other factors contributing to the dryer not starting. Ensure that the dryer is properly plugged in, the door is securely closed, and the control settings are correctly selected.
- Troubleshoot other components: If the dryer still doesn't start after checking the above factors, it's worth checking other components that could potentially affect the start function. This includes the thermal fuse, door switch, and the timer. A malfunctioning component other than the start button could be causing the problem.
- Replace the start button: If you have determined that the start button is indeed the cause of the issue, the fix would involve replacing the faulty button. You can purchase a replacement start button from an authorized Kenmore parts distributor or directly from the manufacturer. Refer to the user manual or online resources for instructions specific to your model on how to replace the start button.
- Seek professional assistance: If you are not comfortable or experienced in appliance repair, it's advisable to consult a professional technician or contact the manufacturer's customer support for further guidance. They can provide expert advice and ensure that the start button replacement is done correctly.
Remember, proper diagnosis of the issue is essential to determine if the start button is the actual problem. If you're unsure about performing any repairs yourself, it's always recommended to seek professional assistance to avoid further damage or injury.
Kenmore 700 series dryer instructions on reversing the door
To reverse the door on a Kenmore 700 series dryer, you can follow these general steps:
- Gather the necessary tools: You may need a Phillips head screwdriver, a putty knife, and a small flathead screwdriver.
- Unplug the dryer: Before starting any work, ensure the dryer is unplugged from the power source for safety.
- Remove the hinge cover: Use a putty knife or a small flathead screwdriver to carefully pry off the hinge cover located on the opposite side of the door.
- Remove the door: Locate the screws that secure the door to the dryer and use a Phillips head screwdriver to remove them. Carefully lift the door off the hinges and set it aside.
- Remove the strike plate: On the opposite side of the door opening, remove the strike plate by unscrewing it.
- Remove the door hinge: Unscrew the door hinge from the side it is currently attached to and transfer it to the other side of the opening.
- Install the strike plate: Attach the strike plate to the opposite side of the door opening using the provided screws.
- Reinstall the door: Place the door onto the new hinges and align it properly. Insert and tighten the screws to secure the door to the dryer.
- Reinstall the hinge cover: Snap the hinge cover into place on the side where the door hinge used to be.
- Test the door: Close and open the door to ensure it operates smoothly and securely.
It's important to note that specific instructions may vary depending on the exact model and design of your Kenmore 700 series dryer. Therefore, it is recommended to refer to the user manual or installation instructions provided by the manufacturer for detailed and model-specific guidance on reversing the door.
What does the flashing flow sensing arrow mean on a Kenmore Elite steam dryer front loading Mod-592??
The flashing flow sensing arrow on a Kenmore Elite steam dryer with the model number 592 typically indicates an issue with the dryer's airflow. This arrow symbol is associated with the dryer's flow sensing feature, which detects and monitors the airflow during the drying process.
When the arrow is flashing, it suggests that there may be a restriction or blockage in the dryer's vent system. This restriction can cause poor airflow, leading to longer drying times and potentially reduced drying performance.
To troubleshoot this issue, you can take the following steps:
- Check the dryer's lint filter: Make sure the lint filter is clean and free from debris. A clogged or dirty lint filter can restrict airflow.
- Inspect the venting system: Check the dryer's exhaust vent hose and ensure it is properly connected and not kinked or obstructed. Additionally, check the external vent to ensure it is clear of any debris or obstructions.
- Clean the venting system: If you haven't done so recently, it's recommended to clean the entire venting system. This involves disconnecting the dryer from the vent and thoroughly cleaning both the vent hose and the external vent.
If after performing these steps the issue persists and the arrow continues to flash, it may be necessary to contact a professional appliance technician or the manufacturer's customer support for further assistance. They will be able to provide specific troubleshooting steps and recommendations for your Kenmore Elite steam dryer model.
Not finding what you are looking for?
