20 Most Recent
Kenmore 33464 / 33465 / 33469 Gas Single Oven - Page 6 Questions & Answers
I have an F029 error code on my Kenmore Elite double wall oven, what does it mean?
Communication between the user interface board and the touch panel can't be initiated
Disconnect power to the unit, wait 30 seconds and restore power. If the error returns, disconnect electrical power and check the wire harness connections between the user interface control board and the touch. Reconnect any loose wires or replace the wire harness if damaged. If you just replaced the user interface control board or the touch panel, you may have used the wrong part. Use your range model number to check the part number and install the correct replacement part. If you didn't replace a part before the code appeared and the wire harness connections are okay, replace the touch panel. If the problem continues, replace the user interface control board.
Kenmore stove
Your Kenmore oven has a built-in fault detector. When the oven detects an issue, the display screen on the control panel will flash a fault code. The F10 fault code on your Kenmore oven indicates that the thermal protector on your oven's control unit, or microcontroller (MCU), has overheated. If the MCU overheats, the computer stops all motor functions. Several items on your oven could cause the thermal protector to overheat. Therefore, you must troubleshoot the F10 code to determine why it appeared on your display panel.
Not finding what you are looking for?