20 Most Recent DISH Network 721 DVR Remote Control - Page 7 Questions & Answers

To whom it may concern, At the top right hand side of your remote press the "tv" button, then underneath that is an "input" button. Press this slowly until you find picture. If this doesn't work, look on the side of the tv for a button labeled "input" or "source". Keep pressing that until you find picture, as an alternative to using the remote. dish guy If you need further help, I’m available over the phone at https://www.6ya.com/expert/brian_142c5ec89a7a3fda

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

0271,0280,0217. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. http://electronicshelponline.blogspot.com/ http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls. Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. http://electronicshelponline.blogspot.com/ http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls. Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

This conversation with Dish Support fixed my problem... Genne Rose (ID: N1D): Hi, my name is Genne Rose (ID: N1D). How may I help you? Daniel Jacobs: My remote won't pair with my Dish DVR Genne Rose (ID: N1D): I apologize for the inconvenience. It will be my pleasure to help you with your issue today. Genne Rose (ID: N1D): Thank you very much for letting me know your concern. We appreciate your time and effort in contacting us regarding this matter. Rest assured, I will help you all throughout this chat session. Genne Rose (ID: N1D): Thank you for providing your account information and PIN when launching the chat. I have your account loaded and have verified your information. Genne Rose (ID: N1D): The following steps will walk you through the process of addressing the remote to your Hopper. • Please press and release the SYSTEM INFO button on the front panel of the receiver. • Then press and release the SAT button. The SAT mode button should then light up with a series of beeps. • Please verify the remote is now working by pressing the CANCEL button. Daniel Jacobs: yes -- the SAT light lights up Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Great. Genne Rose (ID: N1D): Have you done that already? Are you finish? Daniel Jacobs: yes Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Is it working now? Daniel Jacobs: no Genne Rose (ID: N1D): To check, using dish remote, please press and release SAT button, then GUIDE button. Daniel Jacobs: i had already tried that with no success Daniel Jacobs: that doesn't do anything Genne Rose (ID: N1D): I apologize for the inconvenience, Daniel. Genne Rose (ID: N1D): Can you try to reset your receiver by pressing the RESET button on the front panel of the Hopper? Daniel Jacobs: I've done that once, but I can try it again if you want Genne Rose (ID: N1D): Yes, please. Thank you. Daniel Jacobs: oKAY, It's resetting now Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Right after the reset, please do that again, Daniel. Daniel Jacobs: Do what again? Genne Rose (ID: N1D): The instruction I have provided above on programming your dish remote to the receiver. Daniel Jacobs: you mean System Info followed by SAT button? Genne Rose (ID: N1D): Yes, Daniel. Daniel Jacobs: It's still "Acquiring Signal" .... Genne Rose (ID: N1D): can you try SAT then RECORD button instead? Daniel Jacobs: Should I wait until it's done "Acquiring Signal" ? Genne Rose (ID: N1D): Yes, Daniel. Genne Rose (ID: N1D): We have to finish first the reset before we can program the dish remote again. Daniel Jacobs: It's still "Acquiring Signal" ... Genne Rose (ID: N1D): Let's wait for it to be completed first. Daniel Jacobs: Okay it's back Genne Rose (ID: N1D): Great Daniel Jacobs: you want me to do SAT then RECORD? Genne Rose (ID: N1D): Yes, Daniel. Daniel Jacobs: I guess you mean SYS INFO and then SAT and RECORD? Genne Rose (ID: N1D): Yes, that is correct./ Daniel Jacobs: nothing happens. Just the SAT light coming on is all Genne Rose (ID: N1D): Alright. Thank you. Genne Rose (ID: N1D): Now, can you try to press and release SAT button then GUIDE button. Genne Rose (ID: N1D): Are you able to pull up GUIDE Menu ? Genne Rose (ID: N1D): Or press the Menu button? Daniel Jacobs: Nothing happens -- it's not paired Daniel Jacobs: The sys info screen says "No Remotes Connected" Genne Rose (ID: N1D): I'm sorry about that Genne Rose (ID: N1D): Alright. Genne Rose (ID: N1D): Can you do this? Genne Rose (ID: N1D): Let's deprogram your dish remote.1. Press and hold the SAT mode button until all mode buttons light up. 2. The SAT mode button will begin blinking. 3. Press and hold the RECALL and 0 (System Wizard) buttons at the same time for 3 seconds. 4. Press the SEARCH button. 5. Press the VOL + button. 6. Press the STOP button, then wait 5 seconds. 7. If de-linking is successful, 3 descending tones will be heard from the remote. Daniel Jacobs: I heard the descending tones Genne Rose (ID: N1D): Great. Daniel Jacobs: ok Genne Rose (ID: N1D): Now, can you check if the remote is now working on the receiver? Genne Rose (ID: N1D): try to press and release SAT button then GUIDE button or Menu button. Daniel Jacobs: It looks like it might be working Genne Rose (ID: N1D): Perfect! Genne Rose (ID: N1D): You did a great job, Daniel. Genne Rose (ID: N1D): Is it totally working now? Daniel Jacobs: Yeah, I think so -- I got the Guide on the screen Genne Rose (ID: N1D): Awesome! Daniel Jacobs: thanks Genne Rose (ID: N1D): It is perfectly working now. Genne Rose (ID: N1D): You're most welcome. Genne Rose (ID: N1D): Yapeeeeeeeeeeeeeeeeee !! Daniel Jacobs: right! Genne Rose (ID: N1D): Thank you so much for your patience and cooperation, Daniel. Genne Rose (ID: N1D): For future reference, you can also checkhttp://www.mydish.com/support to access quick and easy troubleshooting steps that will save you time in the future. Genne Rose (ID: N1D): I would like to tell you about DISH Perks. It is an exclusive program that provides DISH customers a lot of extras at no additional cost. You can visit www.mydish.com/perks to see a lineup of the latest freebies. Many perks are available for your benefit. Genne Rose (ID: N1D): Have we addressed all of your concerns today, Daniel? Daniel Jacobs: yes thx Genne Rose (ID: N1D): You're welcome. Genne Rose (ID: N1D): Is there anything else I can help you with today? Daniel Jacobs: no thanks Genne Rose (ID: N1D): Thank you for choosing Chat features and allowing DISH to help and for being big part of DISH. It's our pleasure to assist you today. Always keep in mind that DISH appreciates and value you. Have a great day! Take care and regards to you and your family! :) Happy Holidays! Genne Rose (ID: N1D) has disconnected.

0139,0192. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. http://electronicshelponline.blogspot.com/ http://electro-medical.blogspot.com/ http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/ Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

HDMI is ONLY for input to a TV and not to an input to something else.

call your provider

On ViP receivers, (211, 222, 612, 622, 722, 922) Menu, Preferences, Favorites. On Hopper receivers, Menu, Program Guide, Favorites

network area code .to solved this issue call our network opreater for more computer software issue visit https://cbrtechsolutions.net

Call Bose Customer care or Dish Network. Here is a link to Bose: Bose Support Product Help Shopping Info Site Policies Customer Service

Hi there! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you. Please reset the receiver by unplugging it from the wall for 10 seconds. After 10 seconds please plug the receiver back in, allow it to power back on by itself, it will acquire signal and download the guide. If issue persists and you currently have the receiver's power cord connected to a surge protector, please by pass the surge protector and connect the cord directly to a wall outlet. If issue persists after performing this steps please email me at: [email protected] for further assistance. You can also contact us directly at: 1800-333-3474. Kimberly Escobar Social Media Representative DISH L.L.C

You have a 922 and it sucks. They are the worst receivers and it needs to be replaced.

If you have a clear view of the south western sky, the receiver will receive most channels (after running a check switch test, menu, 6-1-1). You will not receive most HD (which comes on Eastern Arc satelllites not on that antenna, or on satellite 129, not on that antenna) and depending on your DMA you may not get locals, but most cable channels will be available, at least in Standard Definition.

0273,0277. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

que significa el codigo de error 006

There is an installation problem, and you need a technician. When the receiver reboots, it sends a boost of power to the LNBF until it gets a signal in return, or gets a response of no signal. If you have damaged lines, a damaged receiver, damaged LNBF, or low signal reception on your antenna, a rebooted receiver will, for a very short time, boost the signal enough to get reception. Then, the receiver will drop the power back to the correct levels, thereby eliminating the short term reception boost. A technician can repair your installation to improve the reception, as long as there is Line Of Sight to the correct satellites.

First, ensure your tv is using the highest resolution possible (Usually 1080 for flat screens) by using an HDMI cable from the receiver to the television, and that you are on the correct input. Second, ensure your tv is not sizing the video by using the 'picture size' or 'aspect' or 'ratio' key on the remote that came with your tv (Not your DISH remote). Third, tune your DISH receiver (with your DISH remote) to an HD channel (for VIP model receivers, when you tune the channel to an HD channel, an opaque white 'HD' appears insude the blue box at the top of the screen). Fourth, hit the star key on the remote, while watching the screen. On the right hand side, near the top, it will cycle as you hit repeatedly the star key, the style of screen widening. Hit the key as often as you need to make the screen appear the way you want it to. The receiver will remember your setting for all HD channels. When finished with the HD channel, tune your receiver (with your DISH remote) to a SD channel (any channel in the guide that does not have the HD icon). Repeat the fourth step. For Hopper/Joey family receivers, hit menu, settings, screen size. Follow the instructions to resize your screen to match your preference. When finished, repeat step four above on each an HD and a SD channel.

Do yoy have a Smart TV? Make and model PLEASE

If your TV and sound system both have a Digital Optical Out/In you can use a TOSLink cable (an optical cable) to connect your TV directly to your sound system, and remove the connection between the DISH receiver and the sound system. As long as your sound system is on the right input, all sound accompanying the picture on screen will go to your sound system. Most TVs also have an option to turn off the internal speakers, if not just reduce your volume all the way down to avoid that weird ghost sound effect. If you use your sound system all the time for volume, you can program the sound system to your DISH remote's AUX, and even set the remote so that it only sends volume and mute commands to the sound system (that way you don't have to dance between sat, tv, and aux all day, just leave it in sat mode). To program your remote to the sound system, follow the instructions on the sheet you got with the remote (yeah, right like anyone kept that) http://www.mydish.com/support/remotecodes you can use that link to program your remote. You can also use the learning mode if your remote has a little glossy square on the top left side and you have the original remote to the sound system. (Learning mode can be gleaned from the remote manual Remote Control Manuals) After programming the aux device, and verifying that it changes the volume up, down, and mute, THEN: Hold AUX until light blinks 3 times, hit pound (#), Volume Up, 0 (Zero), pound (#), SAT, then test to make sure it goes up and down.