20 Most Recent Kenmore 79012 / 79014 / 79019 Gas Kitchen Range - Page 4 Questions & Answers

first put it on cleaning mode again for few minuts and then press cancle .. that should reset the program if it is not working your control panel might be damage :(

Kenmore 79012 /... | Answered on Feb 27, 2014

What is the model number of your unit?

Kenmore 79012 /... | Answered on Feb 18, 2014

Have you purged the gas line to get gas to the range? What is the model number?

Kenmore 79012 /... | Answered on Feb 18, 2014

Just bought a Kenmore and did this conversion myself. You do not change the oven nozzle (jets) but have to wrench it down with a 1/2" wrench as per instructions. After I did this the falme was high as you described. I wrenched it down further and adjusted the air shuttle and it was fine. The brioler is done the same. The wrench adjustment is tight so be aware.

Kenmore 79012 /... | Answered on Feb 10, 2014

There is an item called a regulator, it is not the one that is just out of the tank. This one you can purchase it is only about 2-3 " in size and you install it where your propane line connects to your stove, at the end of your yellow or some times stainless steel line. Once installed all you do is flip the little cap on top of the regulator to the desired position Nat. or L.P. which means for natural gas use or liquid petroleum (propane). It allows you to use your stove with either one with just the flip of the cap on the regulator. They cost anywhere from $40 to $60. It is fast and easy, you can do it yourself. When you are done make sure you check for leaks before you use it. It is always a good idea to consult with a professional. Hope this helps and good luck.

Kenmore 79012 /... | Answered on Jan 04, 2014

These are usually easy enough to take apart if you have have a well lit large room to work in, and take photos of what you remove as you go along.

First get it in a space where you can walk around it. Remove all SMALL screws from the back and wiggle panels as you go to see where they loosen and are still fixed by other screws. Take a sequence of digital camera pics as you go. You are trying to replace the insulation in the back and sides so you only need to remove the outer panels, not take the whole thing apart.

Kenmore 79012 /... | Answered on Dec 20, 2013

Not finding what you are looking for?
Kenmore 79012 / 79014 / 79019 Gas Kitchen Range Logo

605 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6164 Answers


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Kitchen Ranges

  • Kenmore Kitchen Ranges

Most Popular Question

kenmore model 790 78868800

  • Kitchen Ranges