20 Most Recent Kenmore 79013 Stainless Steel Gas Kitchen Range - Page 8 Questions & Answers


The problem could be a damaged temperature sensor or loose wire to the temperature control F11 is the error for the control board keyboard being shorted out. replace the control board and keypad. ... The F30 error code means the temperature sensor probe is open.

Kenmore Kitchen... | Answered on Mar 17, 2018


This video link might help ... it is generic and NOT specific to Kenmores
Range Stove Oven How to Find the Model Number
Good luck on your troubleshooting

Kenmore Kitchen... | Answered on Mar 16, 2018


Kenmore 790 Model Induction Cooktop Error Codes Sears PartsDirect
Take a look at this link ... for model 790 it indicates that error 35 is:
Improper power supply voltage (low voltage) or failed wiring connections
Check:

Disconnect power. Check the power supply wiring. Have an electrician check the supply voltage. If the connections are good and the voltage is normal, the main power control board or filter control board is defective.
So it may need a new control board...

Kenmore Kitchen... | Answered on Mar 14, 2018


hello Joe,

the first thing I think of, is that there is a short-cut with the ground wire.
These short-cuts can be caused by several things. for example humidity, but also a burned insulation.
You have to check that.

ALWAYS BE CAREFULLY WITH ELECTRIC AND UNPLUG THE COOKER BEFORE OPENING IT.

I hope this helps, Dik

Kenmore Kitchen... | Answered on Feb 27, 2018


this might be normal behavior is the unit still heating and boiling items? has the unit worked differently in the past?

see below

Why the smoothtop radiant cooktop element cycles on and off
  1. Save as PDF
  2. Share
Table of contents

Does the radiant heating element cycle on and off?

  • The surface cooking area may glow red when a heating element is ON.
  • Some parts of the surface cooking area may not glow red when a heating element is ON.
  • The warming zone element (on certain models) will not glow red.
  • Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI setting, to prevent damage to the ceramic cooktop. This is normal operation.
  • The radiant heating element retains enough heat when off to provide a uniform and consistent heat. The surface will still be hot even though the element has cycled OFF.
  • Cycling at the HI setting is normal and can occu

Kenmore Kitchen... | Answered on Feb 26, 2018


hello Lorraine,

Most gascookers heve the possibility to change from LPG to natural gas.
You need to change the injectors. The holes in the injectors for LPG are smaller that the ones for natural gas.
I send you a link of Ebay where you can see what you need to look for.
Sometimes the oven can give a problem when it is gas too.

Kind regards, Dik
14results for natural gas cooker nozzles

Kenmore Kitchen... | Answered on Feb 20, 2018


Hello, there are always a lot of problems with the timers.
Of course you can replace the timer, but they are often very costly.
But you can bypass it.
Google on "how to bypass the oven timer" and you will find suggestions.

IF YOU ARE NOT FAMILIAR WITH THIS KIND OF WORK, THEN LEAVE IT TO A QUALIFIED ENGINEER

The link I send you is just for information.
Succes, Dik
Well found you when tried to bypass my timer too For

Kenmore Kitchen... | Answered on Feb 20, 2018


Hello Sara,

I think you have a gasoven too?
in that case I think it is the flame safety device.
when that is gone, the burner goes on very low, although it looks like all went well.
It looks like the one I send you in the link, it is on the side of the oven burner.

I hpe this helps you, kind regards, Dik
Electrolux Tricity Bendix Oven Safety Device HG Fsd Solenoid 359070604...

Kenmore Kitchen... | Answered on Feb 20, 2018

Not finding what you are looking for?
Kenmore 79013 Stainless Steel Gas Kitchen Range Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6220 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Kitchen Ranges

  • Kenmore Kitchen Ranges

Most Popular Question

oven door locks un locks code f90

  • Kitchen Ranges
Loading...