20 Most Recent Kenmore 79013 Stainless Steel Gas Kitchen Range - Page 6 Questions & Answers

due to my area gas licence i cant get into how to fix unless you can provide a tssa# or gas licence#
but power usually flows through high temp thermal cut out, to oven control or eoc then to ignitor then through gas valve to neutral
gas valve is not a load if power has been hooked up direct it has blown

Kenmore Kitchen... | Answered on Sep 21, 2018

it sounds like she may have changed the settings to celius maybe while cleaning
check the use and care guide to set bak to fahrenheit
260c would be around 500f

Celsius to Fahrenheit

Kenmore Kitchen... | Answered on Sep 21, 2018


Quoting from link shown:

What does F23 error code message mean on Kenmore Elite built-in double ovens? Report This
by Manage My Life
August 17th, 2009 What does F23 error code message mean on Kenmore Elite built-in double ovens? The model number is 790.48143800.

: What does F23 error code message mean on Kenmore Elite built-in double ovens?


: Error code

F 23

indicates the control detected a problem with the communication link or can be generated as a result of irregularities in the power supply or usage.

The error code


can often be resolved by removing power to the appliance for a minute and then restoring the power.

By unplugging the appliance it allows the control to receive a fresh supply of power. This in turn will clear the controls memory of any irregularities it may have received from the power supply. Once refreshed the error should no longer be displayed.

Unplug the unit or turn the circuit breaker off for 60 seconds.

Restore the power to the appliance by plugging it back in or turning the circuit breaker back on.

Check to see if the error code is still displayed on the range.

Run the appliance in the cycle that initially caused the error or attempt to turn on broiler.

If the error code is displayed, then service is needed.


: General resolution for problem is based on information submitted with question. If problem persist, contact a service technician to

Sears Repair Department 1-800-469-4663

Kenmore Kitchen... | Answered on Sep 08, 2018

You should check with your local authority about gas regs before attempting this. The manufacturer will have any kits available for this machine. It is most likely only a matter of changing the pilot and burner nozzles as the hole sizes will be different. You will also need to replace the data plate to show that the machine has been changed to a different working gas pressure

Kenmore Kitchen... | Answered on Aug 06, 2018

The "F7" fault code could mean a stuck or shorted key pad/console or it could mean a failed oven control board. There is no way to reset the control.

A service technician would determine if the problem is with Key Panel/Console or the Oven Control by: See image below.


: This is intended for the service technician. I do not recommend attempting to diagnose which one has failed. This test must be performed while connected to the power supply.

I recommend calling a service technician to diagnose and repair your range

Kenmore Kitchen... | Answered on May 23, 2018

If that happens, most likely, the control board had malfunctioned. Some control boards have built-in buttons if your does that you need to replace the control board. If it doesn't, then the problem is the touchpad.

Appliance Repair Brooklyn

Kenmore Kitchen... | Answered on May 20, 2018

Not finding what you are looking for?
Kenmore 79013 Stainless Steel Gas Kitchen Range Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Cindy Wells

Level 3 Expert

6220 Answers


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Kitchen Ranges

  • Kenmore Kitchen Ranges

Most Popular Question

oven door locks un locks code f90

  • Kitchen Ranges