The thermal fuse can't be reset if the fuse has or is blown, it must have to be replaced. One of the wires that supply power to the oven element or igniter might be burnt out. These wires will generally burn out near the heat source. To determine if a wire has burned out, inspect the wires leading to the element or igniter.

Kenmore Kitchen... | Answered on Aug 08, 2020

1 Answer

What is the error code EO 29 Kenmore elite stove?

I searched the internet using https://www.google.com and could not locate an error code of EO 29.

Without knowing the model number of the stove, I found error codes for a Kenmore 790 that may be for a similar condition.

https://www.searspartsdirect.com/diy/error-codes/range-repair/1234574/kenmore-790-model-4-digit-range/0582

Quoting: F028 or F029
Communication between the user interface board and the touch panel can't be initiated
Check/Repair
Disconnect power to the unit, wait 30 seconds and restore power. If the error returns, disconnect electrical power and check the wire harness connections between the user interface control board and the touch. Reconnect any loose wires or replace the wire harness if damaged. If you just replaced the user interface control board or the touch panel, you may have used the wrong part. Use your range model number to check the part number and install the correct replacement part. If you didn't replace a part before the code appeared and the wire harness connections are okay, replace the touch panel. If the problem continues, replace the user interface control board.
Possible parts
Touch panel, user interface board

Sears web site for parts replacement:

https://www.searspartsdirect.com/diy/repair-help

Kenmore Kitchen... | Answered on Jun 05, 2020

1 Answer

Kenmore electric range 94149 circuit breaker blew we got it back on now my oven and top burners don't work I can set clock please advise

https://web.archive.org/web/20180613173353/https://c.shld.net/assets/docs/spin_prod_848270112.pdf

Kenmore Kitchen... | Answered on May 25, 2020

1 Answer

Hello everyone and thank you for listening to me. I have a Kenmore stove/oven model number 790 72909015. It has four burners and a center burner. The right side works fine. The left front ignites properly. When I turn on the left rear to light I hear clicking and see sparking in the left front and nothing in the left rear. I can like that one with a match. When I try to light the center I get the same situation I see sparking I hear clicking in the left front! I do not see a spark at the center burner. Again I could like that burner with the match. Thank you in advance for advice. I hope everyone is safe!

igniter week -igniter not aligned -gas pressure-weak -ratio not correct debris/carbon

Kenmore Kitchen... | Answered on May 01, 2020

0 Answers

Kenmore stove 970-686028. The led display just went off If I turn one of the element knobs on, we hear a funny noise and display comes on with 12:00 but no heat

Kenmore Kitchen... | Posted on Mar 25, 2020 | Be the first to answer

2 Answers

My Kenmore oven with ES 585 Electronic control want reach desired temperature. What may be the cause?

Element could be bad or temperature sensor / probe.

Kenmore Kitchen... | Answered on Mar 23, 2020

0 Answers

Kenmore stove F93 Error Message. How to fix please?

Kenmore Kitchen... | Posted on Mar 19, 2020 | Be the first to answer

1 Answer

I have a Kenmore Electric range model 790.41072100. The cooktop burners do not work. Everything else works, Oven, clock, warmer drawer etc.

How to Reset a Kenmore Elite Stove Oven

Press the "7" button on the Kenmore Elite keypad.
Continue holding the "7" button for at least six seconds until a single beep sounds.
Press the "Start" button on the keypad once. This will reset the oven back to the factory default settings.

Kenmore Kitchen... | Answered on Mar 09, 2020

0 Answers

My Kenmore oven takes forever to preheat. Then the temp fluctuates. Might go from 300* to 475* while baking. Replaced the probe, but evidently wasn't the problem. Any advice?

Kenmore Kitchen... | Posted on Feb 12, 2020 | Be the first to answer

1 Answer

I have kenmore model number but I need to take range down as I can't replace bulbs. I need instructions for kenmore elite range hood model number 233.31614

Call or chat with Sears customer service. (I am not posting telephone numbers directly myself due to many scammer spammers posting fraudulent phone number on FIXYA, but Sears web site gives contact information for assistance.)

https://www.searspartsdirect.com/combo/0583-1234588/kenmore-elite-range-hood-parts

Kenmore Kitchen... | Answered on Dec 03, 2019

1 Answer

Re: Kenmore electric range, model 790.9661. While

Take a flat head screw driver and gently pretty the door. The temp decreases fairly rapidly and then the lock is disabled. Good luck!

Kenmore Kitchen... | Answered on Nov 28, 2019

1 Answer

I have a model 790.45482502

Usually when you pick up the unit underneath there is an area that has a metal shell over it with a few screws that comes off and reveals the bottom of the switches. The switches are screwed in from the top under the shield that tells you the temp. please make sure to turn off electric power to unit before you start as there is live 220 voltage even if the stove is off

Kenmore Kitchen... | Answered on Nov 26, 2019

1 Answer

I have a kenmore elite dual fuel range model 790.4662* . The oven door is locked and there is nothing in the manual about unlocking the door.

https://www.manualslib.com/manual/85543/Kenmore-790-4662.html

See page 17 of the online manual above with steps to unlock.

Kenmore Kitchen... | Answered on Oct 16, 2019

3 Answers

Need owners manual (not users guide) for Kenmore stove model 790.46783900. tried all suggestions for deleting SAB mode.

Hi Lu, you can disable the Sabbath mode by holding down the bake and broil buttons for 3-5 seconds then using the clock button scroll down the menu till it reads sab. Press again till display reads off, then pleas start or clear to return to the clock display. There should also be a technical sheet on the back of the unit behind the control panel. It will help you out if you need it. Hope that helps.

Kenmore Kitchen... | Answered on Oct 03, 2019

1 Answer

Have a kenmore c970-595084 and says F1 stove top still works oven does not. None of the electronic board works. Stove top is not part of the board as they have the historic knobs

Hey D, f1 can be one of three problems. A stuck key pad,test by pressing all the buttons to see if they all make noise, if one doesn't then that's the stuck one. A bad oven temperature sensor, if it's gone bad it will not send the proper temp reading to the control board. Or it could be a bad control board itself. If nothing is working/changing mode it's most likely the stuck keypad. If you're not comfortable working with electrical components I suggest calling your local repair company to check it out. Hope that helps.

Kenmore Kitchen... | Answered on Oct 03, 2019

2 Answers

Can you mail me a manual on my Kenmore Gas Stove model nimber # 970-336492. I purchased it used & did not recieve a manual with it. Could you tell me if you can do this for me?...Thank-You.

Gas stoves are easy, but can be dangerous to try and fix for yourself. If you go to Googles a search on your make and model, you may end up at getting the manual. Sears closed down its stores, and they may have a web site where you can find the manual. Kenmore is a Sears brand, but the stove is made by one of many companies that made appliances for Sears, so careful web searching may help you. I did find your manual by using Google on a simple search, it was the first thing to come up. It looks like you are in Canada by the place i found the manual. Fixya did not let me attach the PDF, but you can see the image I attached of the web search I did. It shows what the manual will look like when you find the link to download it.

Kenmore Kitchen... | Answered on Aug 18, 2019

Not finding what you are looking for?

26 questions posted

Ask a Question

Usually answered in minutes!

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Kenmore 79013 Stainless Steel Gas Kitchen Range? Or just drag it here!

View Most Popular

Kenmore Kitchen Ranges

Kenmore Kitchen Ranges

oven door locks un locks code f90

Kitchen Ranges

20 Most Recent Kenmore 79013 Stainless Steel Gas Kitchen Range - Page 2 Questions & Answers

I have a kenmore oven and stove top model 970-687123. the left front power element has stop working.

On a glasstop range one of the elements when turned on will go to hi heat and stay there regardless of control location...what causes this and what is the solution?

The control panel on my kenmore gas range model #790.74333311 keeps beeping and the numbers and broil and bake ect. keeps flashing itried to unplug and reboot but same when i plyg it back in

Kenmore stove control panel won't come on?

What is the error code EO 29 Kenmore elite stove?

Kenmore electric range 94149 circuit breaker blew we got it back on now my oven and top burners don't work I can set clock please advise

Kenmore stove 970-686028. The led display just went off If I turn one of the element knobs on, we hear a funny noise and display comes on with 12:00 but no heat

My Kenmore oven with ES 585 Electronic control want reach desired temperature. What may be the cause?

Kenmore stove F93 Error Message. How to fix please?

I have a Kenmore Electric range model 790.41072100. The cooktop burners do not work. Everything else works, Oven, clock, warmer drawer etc.

My Kenmore oven takes forever to preheat. Then the temp fluctuates. Might go from 300* to 475* while baking. Replaced the probe, but evidently wasn't the problem. Any advice?

I have kenmore model number but I need to take range down as I can't replace bulbs. I need instructions for kenmore elite range hood model number 233.31614

Re: Kenmore electric range, model 790.9661. While

I have a model 790.45482502

I have a kenmore elite dual fuel range model 790.4662* . The oven door is locked and there is nothing in the manual about unlocking the door.

Need owners manual (not users guide) for Kenmore stove model 790.46783900. tried all suggestions for deleting SAB mode.

Have a kenmore c970-595084 and says F1 stove top still works oven does not. None of the electronic board works. Stove top is not part of the board as they have the historic knobs

Can you mail me a manual on my Kenmore Gas Stove model nimber # 970-336492. I purchased it used & did not recieve a manual with it. Could you tell me if you can do this for me?...Thank-You.

Not finding what you are looking for?

Ask a Question

Popular Products

Kenmore 79012 / 79014 / 79019 Gas Kitchen Range

Kenmore 91112 / 91114 / 91117 Electric Kitchen Range

Kenmore 95002 / 95004 Electric Kitchen Range

Kenmore 78812 / 78814 / 78819 Gas Kitchen Range

Kenmore 46123 Stainless Steel Electric Kitchen Range

Top Kenmore Kitchen Ranges Experts

Cindy Wells

Marvin

Michael Thomas

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Manuals & User Guides

Kenmore Kitchen Ranges

oven door locks un locks code f90