20 Most Recent
Texas Instruments TI-82 Calculator - Page 2 Questions & Answers
How do i find grouped data in L1 and L2 on ti 82
I am not sure I understand but if it the same problem as in your other posted question, here is what I wrote.Are the data in
L1 and l2 in any way related? If they are (being x-values and y-values
of some data set) then you need to do regression analysis (2-var stats)If they are not related (connected) you can calculate the mean of each group separately. Do
1-var stat by specifying the L1 list first (may be the default), get
your average of the values in L1. Then you can do 1-var stat on the data
in L2 by specifying the list L2 on the command line.1-var L2 ENTERNote: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.
10/8/2013 7:40:11 PM •
Texas...
•
Answered
on Oct 08, 2013
Error stat
Are the data in L1 and l2 in any way related? If they are (being x-values and y-values of some data set) then you need to do regression analysis (2-var stats)If they are not related (connected) you can calculate the mean of each group separately. Do 1-var stat by specifying the L1 list first (may be the default), get your average of the values in L1. Then you can do 1-var stat on the data in L2 by specifying the list L2 on the command line.1-var L2 ENTERNote: What I am describing here is valid for the TI 83 Plus/TI84 Plus, but I suspect the steps are similar to the TI 82.
10/8/2013 7:35:01 PM •
Texas...
•
Answered
on Oct 08, 2013
After a few months on not using my calculator, I
TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible.
8/29/2013 1:56:03 AM •
Texas...
•
Answered
on Aug 29, 2013
Sin(4)
The -0.7568 value is the correct result for the sine of 4 radians. To switch the calculator to degrees, press MODE, use the cursor keys to move down to the Rad/Deg line, highlight "Deg", press ENTER then 2nd [Quit].
6/1/2013 5:29:40 PM •
Texas...
•
Answered
on Jun 01, 2013
TI-82
try this, try reseting the calculator blind. hit 2nd then + then 7 then 1 then 2. That's how you reset it on an 83,84,89 and so on. if you have a friend see how he resets his 82 and try it the same way. It could just be that your screen is ruined. this can happen if it gets alot of pressure in a back pack. GOOD LUCK
3/27/2013 4:13:13 PM •
Texas...
•
Answered
on Mar 27, 2013
My screen is blue when
Having gone over a month with no response to my query, I assume the suggested screen adjustment solved the problem.
2/18/2013 8:08:40 PM •
Texas...
•
Answered
on Feb 18, 2013
ERR: STAT PLOT
ERR: STAT PLOT meaning tha you are trying to display a graph when there is a StatPlot On that uses an undefined list
2/3/2013 10:27:52 PM •
Texas...
•
Answered
on Feb 03, 2013
Mixed numbers
If the result is positive, type in the integer part then add the fraction part either with the help of the fraction key or the division key. (I do not think that the TI82 has a fraction key.If it is anything like the TI3 there is command under MATH >Frac. It should be pressed after you enter the mixed number to keep the result as a fraction.If the mixed number is negative you enclose the whole number in parentheses. Press the change sign (-) key to negate the result.
9/28/2012 2:35:22 AM •
Texas...
•
Answered
on Sep 28, 2012
Making PI a variable in TI-82 Calculator
The calculator does not have a Computer Algebra System or CAS: It cannot handle non numerical quantities. Every letter symbol must have a value stored in it prior to being used. If no value is stored in a letter symbol, value 0 is assigned to it. Sorry.As to calling Pi a variable, I would not got that far, even if the calculator would give me 2Pi.TI calculators that have a CAS are the TI92 Plus, the Voyage 200 PLT, and the TI Nspire CAS, TI Nspire CX CAS.
4/15/2012 9:07:58 AM •
Texas...
•
Answered
on Apr 15, 2012
I have a TI82 and the enter button wont work?
The pads get gummed up over a period of time, take the calculator apart and carefully seperate the rubber pad from the circuit board, take rubbing alcohol with Q-Tips and clean the area in question, making sure the pad and the circuit board are good and clean in the area that is giving trouble.
3/9/2012 12:12:29 AM •
Texas...
•
Answered
on Mar 09, 2012
When trying to write simple
Dimension mismatch error occurs when arguments are not with same dimensions. Two or more arguments must be of the same dimension. For example, [1,2]+[1,2,3] is a dimension mismatch because the matrices contain a different number of elements. By the way, it it very easy to resolving your problem with graphing linear function. See captured image
3/1/2012 9:50:41 PM •
Texas...
•
Answered
on Mar 01, 2012
I have a TI 82
Not the 2. Use the [2nd] key near the upper-left corner of the keyboard.
12/7/2011 7:57:14 PM •
Texas...
•
Answered
on Dec 07, 2011
Not finding what you are looking for?