20 Most Recent
Texas Instruments TI-30 XIIS Calculator - Page 2 Questions & Answers
X^3= 9
Divide both sides by 3 to find x
x^3/3 = 9/3
x^=3
therefore 3^3=9
5/12/2014 5:53:19 PM •
Texas...
•
Answered
on May 12, 2014
Ho do I get DEG off of my calculator
Change to a different angular mode. Press the DRG key, use the left/right arrow to select the desired mode, then press ENTER twice.
Be aware that whatever angular mode you select, the display will show either "DEG", "RAD", or "GRAD" to indicate the mode.
5/7/2014 2:37:11 PM •
Texas...
•
Answered
on May 07, 2014
Common logarithms with calculator ti 30xiis
Use the "LOG" key just below the "2nd" key at the upper-left corner of the keyboard. For example, to calculate the common log of 2, press LOG 2 ) ENTER.
4/24/2014 3:13:51 PM •
Texas...
•
Answered
on Apr 24, 2014
Texas 30XIIB binomial cdf
The only known equation for the cumulative binomial distribution is the sum of the individual binomial probabilities. Some more sophisticated (and more expensive) calculators have that equation built in, but the 30xii does not.
If n>30 and n*p>5 and n*(1-p)>5 then you can approximate the cumulative binomial with the normal probability function, but again the 30xii does not have that built in.
4/14/2014 3:33:50 PM •
Texas...
•
Answered
on Apr 14, 2014
My TI-30XIIS calculator displays
I had this problem also and just fixed it. I hit 2nd key...don't hold it, (it should say 2nd in the lower left corner across from the DEG) then click the K button (also the divide key). The arrow and DEG will remain, but do not affect simple math calculations. Hope this helps!
4/7/2014 11:06:11 AM •
Texas...
•
Answered
on Apr 07, 2014
Change mode
To change the angular mode, press the DRG key then select the desired mode. To change the display mode, press 2nd SCI/ENG then select the desired mode. Or were you asking about some other mode?
1/30/2014 5:38:35 AM •
Texas...
•
Answered
on Jan 30, 2014
Screen brightness adjust key
There is no key to adjust the screen contrast on the TI 30 XII S. You can try to reset the calculator by pressing 2nd 0.
It is possible that you have kept this solar-powered calculator too long in the dark. Give it some light.
1/8/2014 5:08:02 PM •
Texas...
•
Answered
on Jan 08, 2014
How to get degree sign off
Press the DRG key then select the desired angular mode.
Be aware that whatever angular mode you set, the corresponding indicator will appear on the screen. There is no way to get none of them to appear (short of taking a razor blade to the display and cutting some traces, a procedure I would NOT recommend).
12/15/2013 11:19:27 PM •
Texas...
•
Answered
on Dec 15, 2013
How do I get DEG off of my calculator screen??
On the 30XIIS, press the DRG key to bring up a menu. Select the desired angular mode. Be aware that whatever mode you select, the display will indicate that mode.
12/12/2013 12:24:36 AM •
Texas...
•
Answered
on Dec 12, 2013
30xiis decimals square root
In general you cannot. If the square root happens to be an integer (ex: SQRT (4)=2) or a rational number (SQRT(16/9)=4/3) you can convert from one form to the other, but that is the same as converting from a decimal to a fraction.However you can never convert 1.414213562 (the first 10 digits of SQRT(2)) into the radical SQRT(2). The reason is that root here is an irrational number: its decimal representation is endless and not periodic (non repeating).
11/18/2013 12:25:26 AM •
Texas...
•
Answered
on Nov 18, 2013
Not finding what you are looking for?