Hi,

You will have to report faithfully the message returned, you cannot use your interpretation of the message. Error messages are codified. Each one will correspond to very particular error conditions. I did check the manual for all possible error messages and there is none that states wrong info.

My hunch is that there are errors in your data, but I can't say what type of error: I do not have the actual message returned. Verify you data, item by item, and try again.

**To make sure that the calculator is well configured to do statistics**

Hope it helps.

Thank you for rating this solution

You will have to report faithfully the message returned, you cannot use your interpretation of the message. Error messages are codified. Each one will correspond to very particular error conditions. I did check the manual for all possible error messages and there is none that states wrong info.

My hunch is that there are errors in your data, but I can't say what type of error: I do not have the actual message returned. Verify you data, item by item, and try again.

- Press [STAT][5:SetUpEditor][ENTER]
- Press [2nd][0] (CATALOG) and press [PRGM] (C) to jump to the first command starting with C.
- Scroll down to [ClrAllListsts] and press [ENTER]
- Calculator replies
**Done**

Hope it helps.

Thank you for rating this solution

Texas... • Answered on Mar 07, 2021

the area of your roof is equal to the base (B) times the hight (H) divided by 2.

A = ( B x H )/ 2 = 120

To get the Perimeter of your roof you need to sum the base plus the sides (S)

So P = B + 2 x S

if you have a slope degree of 30 then

B/2 = cos (30) x S

so P = B + 2 x B / 2 / cos(30)

P = B ( 1 + cos (30) )

we also know that

H = tg (30) x B/2

from this last one we can go back to the Area and get a value for B

120 = ( tg (30) x B / 2 x B) / 2

480 x SQRT(3) = B^2

B = SQRT(480/tg(30))

So:

P = SQRT(480/tg(30)) x ( 1 + cos (30))

tg (30) = 1 / SQRT(3) cos (30) = SQRT(3)/2

P = 2 SQRT(30 x (12 + 7 x SQRT(3) ) ) or aproximately 53.8m

A = ( B x H )/ 2 = 120

To get the Perimeter of your roof you need to sum the base plus the sides (S)

So P = B + 2 x S

if you have a slope degree of 30 then

B/2 = cos (30) x S

so P = B + 2 x B / 2 / cos(30)

P = B ( 1 + cos (30) )

we also know that

H = tg (30) x B/2

from this last one we can go back to the Area and get a value for B

120 = ( tg (30) x B / 2 x B) / 2

480 x SQRT(3) = B^2

B = SQRT(480/tg(30))

So:

P = SQRT(480/tg(30)) x ( 1 + cos (30))

tg (30) = 1 / SQRT(3) cos (30) = SQRT(3)/2

P = 2 SQRT(30 x (12 + 7 x SQRT(3) ) ) or aproximately 53.8m

Texas... • Answered on Jan 29, 2021

i had the same problem. If you hit 2nd down 2nd down 2nd down and keep repeating untill the screen clears it should solve the problem. i tried the other solutions that tried clearing the memory and they didnt do anything but erase the equations i had previously put in it (great). But this should work.

Texas... • Answered on Jul 30, 2020

Texas... • Posted on May 11, 2019

Press any key (except for 2nd and On), and the message should disappear.

Texas... • Answered on Mar 12, 2019

For cube roots, use the cube-root function in the MATH menu. For example, to calculate the cube root of 8, press MATH 4 8 =

For other roots (including cube root), use the xth-root function in the MATH menu. For example, to calculate the fifth root of 32, press 5 MATH 4 3 2 =

For other roots (including cube root), use the xth-root function in the MATH menu. For example, to calculate the fifth root of 32, press 5 MATH 4 3 2 =

Texas... • Answered on Aug 03, 2018

You should learn about scientific notation. The two values are the same, just written differently.

Texas... • Answered on May 20, 2018

Texas... • Posted on Feb 01, 2018

Texas... • Posted on Jan 21, 2018

Texas... • Posted on Jan 19, 2018

If you're talking about your laptop, try to gently remove the button and clean it with a laptop cleaner. spray a bit of it on a small piece of cotton until its damp, not wet, and clean the area, and put the button back on.
If it is infact something wrong with the sensor take it to a local computer store. If you're working with a mac, apple should have a solution for you.

Texas... • Answered on Jan 06, 2018

Texas... • Posted on Dec 17, 2017

Texas... • Posted on Nov 12, 2017

You have attempted to use, edit, or delete an archived variable. For example, the expression dim(L1) produces an error if L1 is archived

Texas... • Answered on Nov 11, 2017

this happened to me as well. i looked it up and heres what i found:

http://www.prenhall.com/divisions/esm/app/graphing/ti83/faq/faq.html

basically you have a stat plot on so to turn it off, press 2nd and then the Y= button to get to "Stat Plot"

one of them is turned on so press enter and select OFF. this should fix the problem!

http://www.prenhall.com/divisions/esm/app/graphing/ti83/faq/faq.html

basically you have a stat plot on so to turn it off, press 2nd and then the Y= button to get to "Stat Plot"

one of them is turned on so press enter and select OFF. this should fix the problem!

Texas... • Answered on Aug 17, 2017

2,094 questions posted

Usually answered in minutes!

1,916 Questions

1,034 Questions

822 Questions

545 Questions

437 Questions