20 Most Recent Brother IntelliFAX 2750 Plain Paper Laser Fax - Page 6 Questions & Answers

Open the panel on the back of the machine and have a close look and the fuser unit. I suspect you either have a sheet of paper wrapped around the fuser or more likely the teflon sleeve on the fuser roller has been damaged. The cost of a fuser is very close to the cost of a new machine. If yours was a multi-function unit I would buy a new stand-alone printer and strip it for parts as that is cheaper than the parts.

unplug it from the mains for 30 seconds and plug it back in. The will clear the RAM.

Go here: http://support.brother.com/g/b/faqendbranchprintable.aspx?c=in&lang=en&prod=mfc8220_as&faqid=faq00000195_002&printable=true

The toner container requires resetting. The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner. ... Installing a non-Brother toner cartridge or refilling a toner cartridge will not clear a toner low or toner empty indication on the machine. Use a Brother cartridge.

• Turn off the power to the machine. ...
• Fully open the top cover of the machine by lifting the top cover handle (1). ...
• Remove the drum units and toner assemblies from the machine by grasping them by the center and lifting them from the machine.
• Test the drum units. A drum unit may be responsible for the issue. In order to determine which drum(s) is causing the issue, they will be placed one by one in the BLACK position of the machine. a. Open the top cover of the Brother machine. b. Choose any drum/toner and place it in the BLACK position of the machine.

Watch this video. Even though it isn't your printer model exactly. the same method applies to your printer. How to clean Brother DCP and MFC print head nozzles

Press Menu then select Ink Management then Test Print - Print Quality and MONO START. Come back with the result to help you

Connect the power cord to your brother machine, &then connect it to an electrical socket.
Press the up or down arrow key to select the network option & press OK
Press the up or down key to select the WLAN option & press OK.

Reverse the steps in this video https://m.youtube.com/watch?v=Of4p888ZqDA

https://smallbusiness.chron.com/brother-printer-code-e50-mean-59164.html

This is an advice from this website; https://www.cartridgepeople.com/info/printer-error-codes/brother error 50 -There has been a malfunction of the fuser unit and the temperature, in particular. Switch the machine off for 5 minutes then on again. If the problem persists, contact the manufacturer.

see the link https://www.thegonzotribune.com/how-to-reset-the-toner-cartridge-settings-on-the-brother-mfc-l2710dw-laser-printer-solve-the-change-toner-error

??? ????????

Manual here? https://site.xavier.edu/polt/typewriters/Brother_Electronic_Typewriter.pdf Paper copy SERVICE manual https://www.ebay.com/itm/383611063203

https://www.brother-usa.com/virdata/content/en-us/printers/wirelessprintingassistance/setupinstructions/hl2280dw%20wireless%20setup%20for%20windows%20rev%20ld%2003282011.pdf

https://support.brother.com/g/b/faqend.aspx?c=us_ot&lang=en&prod=hll2360dw_us&faqid=faq00100429_003#:~:text=Connect%20the%20power%20cord%20to,WLAN%20option%20and%20press%20OK.

Very easy. Video and text articles. https://www.google.com/search?q=Brother+MFC+J491dw+Wireless+Printer+Setup Manual

Manuals ' MFC-J491DW ' Canada ' Brother

https://support.brother.com > manualtop > prod=mfcj49... Online User's Guide (HTML/PDF). Release Date: 02/15/2021. Version: C Size: -. A printable PDF version of this guide is available ... ..

Follow the instructions in the setup manual.

It is always Step 1. You have to tell the device to find the other device, it isn't automatic.

1. Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink.
2. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.

Feb. 16, 2021

network using the supplied CD-ROM without a USB cable.

https://support.brother.com > faqend The Manual is always a good place to start. https://support.brother.com/g/b/manuallist.aspx?c=us&lang=en&prod=hll2300d_us_eu_as&type2=5 ..

The Brother Printer Error TS-07 occurs when your brother printer can't detect a WLAN access point or router that has WPS or AOSS enabled. You can fix this Brother Printer Error Code TS-07 easily and quickly on your own by following the stepwise procedure specified below. The step by step process on how to fix Brother Printer Error TS-07 is as follows.

• Firstly, ensure that your WLAN access point or router supports WPS or AOSS. You can check it either by looking for icons present on your router or by checking the documents that were provided with your WLAN Access Point or Router.
• If your brother printer is WPS or AOSS enabled, configure your wireless settings using automatic wireless mode (WPS or AOSS).
• Ensure that you operate both the brother printer and WLAN access point or router.
• For an undisturbed internet connection, place your Brother Printer within the range of your WLAN Access Point or the Router.
• Don't keep any signal emitting objects like mobiles around your brother printer or the WLAN Access Point/Router because these objects may disturb your WLAN Router or Access Point.
• Now press the 'Menu' option on your brother printer and then select the network and then tap on 'OK.'
• Now, with the help of the up and down keys on your printer, check for the WLAN network, select it and then click on 'OK.'
• Look for the WPS or AOSS option, select it and then tap on 'OK.'
• If the message 'WLAN Enable' appears on the screen, choose the 'accept' option. By this, the wired network setting will be disabled.
• If 'Network I/F switched to wireless' or 'Enable WLAN' message is displayed, click on the 'OK' option.
• Now hold on the WPS or AOSS button present on the WLAN Access Point/Router for some time. You have to hold the button located on your WLAN Router or Access Point.
• Then, press the 'OK' option. Now your Brother Printer will automatically detect the mode of your WPN Access point and connect to your wireless network.
• Now, on your printer's LCD screen, the WLAN report will be displayed and it will be printed automatically.
• If at all the connection fails, then check the error code on the printed WLAN report.