20 Most Recent Brother IntelliFAX 2750 Plain Paper Laser Fax Questions & Answers


Laser scanner motor does not lock

Brother... • Answered on Jan 23, 2011


There is none. When you plug it in, it's powered up automatically.

Brother... • Answered on Jan 14, 2011


If you had it set up to be on a fax line with a special ring you will have to change it to normal ring line and set it to auto detect non fax ring.

Brother... • Answered on Jul 15, 2009


Brother Intellifax 2750. Prints light on the left side of the paper (left being it's out of the fax and you're looking at the paper). Changed cartridge and it's still doing it. What ya think? Thank you in advance.

on Aug 12, 2008 • Brother IntelliFAX 2750 Plain Paper...

Tip

Make sure its the toner light and not the drum replace symbol. make sure you pulled the tape off the toner.

Brother... • Answered on Feb 16, 2008


Owners manual will show you how to properly turn down the volume. You can find a manual on Brother.com I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Brother... • Answered on Aug 10, 2007


To just change the font size, press and hold the Code button. Then press the 1 (! and Size) key several times until the desired character size is reached. Then release the Code key. See https://www.manualslib.com/manual/219240/Brother-P-Touch-Extra-Pt-320.html?page=29#manual . This works unless you are already using one of the Big fonts. However, the size of your label tape will limit the font sizes available. To change the font, press and hold Code and then press Font until you get the desired font. Release the Code key at this point. I hope this helps. Cindy Wells

Brother Office... • Answered on Apr 14, 2021


Follow the instruction supplied with the downloaded installation/setup software from Brother.com

Brother Office... • Answered on Apr 01, 2021


Check you have set it up as a fax machine, (outdated technology) and fax is enabled.

Brother Office... • Answered on Mar 08, 2021


Go to devices and printers to see if your printer is set to default. Make sure the printer cables are plugged in tight. Offline means it is not getting a signal . In Case You Still Having Problem Then Follow Us For On : Brother Printer Support

Brother Office... • Answered on Feb 11, 2021


Sir/Madam he following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter, Or Visit official Brother Printer website For Brother Printer Troubleshooting Page Url Below:http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en Or Still Having Problem then follow Us On For Brother Printer Support

Brother Office... • Answered on Feb 11, 2021


Follow these instructions:http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/faq/faq/000000/002500/000055/faq002555_000.html?reg=eu&c=eu_ot&lang=en&prod=hl4040cn_all

Brother Office... • Answered on Feb 11, 2021


This is a error about the head unit! it got problem with moving or lockate a position!Service is the solution for these :)

Brother Office... • Answered on Feb 11, 2021

Not finding what you are looking for?
Brother IntelliFAX 2750 Plain Paper Laser Fax Logo

Popular Tags

18 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Cindy Wells

Level 3 Expert

6259 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Brother Office Equipment & Supplies

  • Brother Office Equipment & Supplies

Most Popular Question

machine error code 71

  • Office Equipment & Supplies
Loading...