Brother IntelliFax-2820 Laser Fax - Answered Questions & Fixed issues


Everything seems to indicate a dirty 'corona wire'. This seems to be the most common cause of vertical white lines running the length of a page when copying/sending. Below is a link to the User's guide for your machine with instructions for cleaning the corona and other care when using your fax machine. Best of luck.
Greg
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_IntelliFax_2820_2920_MFC_7220_7225N_EN_1344.PDF

Brother... | Answered on Aug 23, 2019 | 479 views


Press Menu * 2864 (within 2 seconds) [MAINTENANCE MODE] press 01 (INITIALIZE)

Brother... | Answered on Mar 28, 2017 | 5,892 views


you can clean with alcohol and a q-tip, sounds like you have a bad toner cart. or fusing unit is bad

Brother... | Answered on Jan 08, 2016 | 182 views


Get some paper dust cleaning paper from a an office supply company and run a sheet thru it a few times. It's sticky and will clean the rollers.

Brother... | Answered on Jun 20, 2015 | 170 views


1. Maybe a Paper Jam below the drum
2. A lever on the inner back cover is missplaced

Brother... | Answered on Mar 16, 2015 | 169 views


Is it a name brand cartridge or a cheaper knock off? Some printers won't recognize a different cartridge even if it is the same size and shape. They make them that way so you have to buy the makers cartridge.

Brother... | Answered on Dec 03, 2014 | 96 views


What do you mean ?

Brother... | Answered on Nov 29, 2014 | 49 views


make sure the receive mode is Fax or Fax/Telephone and it will work

Brother... | Answered on Nov 29, 2014 | 125 views


LCD is Faulty. Replace it

Brother... | Answered on Nov 29, 2014 | 71 views


you have an obstruction either a piece of paper between the rolllers or the secondary feed rollers are not turning.... open the machine and follow the feed path ...take a piece of paper and manually feed the paper with the machine in the off position look at the feed rollers then the secondary rollers( usually two small rods with rubber sleeves kissing each other ...if you can look at the sides on the machine( inside the cover) see if the gears ( usually white ) can turn or mesh correctly... if you do not see any obstruction then these rollers are not turning when they are supposed to when you press the print button. 90 percent of these problems are paper jams if no jam something is not activating the feed rollers

Brother... | Answered on Sep 05, 2014 | 155 views


I spoke with Brother and one of the options was to open the cover, push options, push start, and then 1, then 1 again. If accept comes up, select. Then close cover and try again.

Brother... | Answered on Aug 23, 2014 | 9,093 views


https://www.brother-usa.com/support

Brother... | Answered on Jul 01, 2014 | 90 views


Was there a loud cracking gear sound when you print ?
Or the printout was blank?
If these two symptoms exist, then your left frame is broken, you need to replace a new left frame or at least the locking DEVELOP JOINT (might be broken).

Brother... | Answered on Apr 11, 2014 | 57 views


Open the left cover, you will find 2 solenoids near to the front. When printing you the vertical & horizontal should be working, if not then you will have to clean the solenoids, remove the sticky material around the hole area, apply some WD40 then test it again.

Brother... | Answered on Apr 04, 2014 | 72 views


Key sheet in the control panel is faulty

Brother... | Answered on Dec 28, 2013 | 52 views


The toner cartridge is in the drum unit. push the blue lever and the toner pops out, make sure you have a toner cartridge in the drum unit. Lawrence

Brother... | Answered on Nov 28, 2013 | 386 views


you cant reprint.if your fax paper jamed or your machine had an error you can reprint.when you get a fax automaticallay your memory will be clean

Brother... | Answered on Nov 27, 2013 | 308 views


clean the scanner, which is the .5 inch thick piece of glass that the ppr runs over as is is scanned

Brother... | Answered on Nov 23, 2013 | 102 views


Kindly check if the telephone cord is connected properly from the walljack to the LINE jack of the machine and the handset is connected to the jack that shows picture of a telephone.
If it still shows telephone press hook/speaker phone.
Hope this will help.

Brother... | Answered on Nov 20, 2013 | 253 views


check paper ....!! or ribbon toner is it inserted properly
hope if it helps

Brother... | Answered on Nov 20, 2013 | 516 views

Not finding what you are looking for?
Brother IntelliFax-2820 Laser Fax Logo

993 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...