Brother LS-1217 Mechanical Sewing Machine - Answered Questions & Fixed issues


Check out this site. There is pictures of each machine there. All the Q&A answers in simple language, as well as a GREAT cust. support. (its a Brother after all!)
I found download manuals there as well.

http://welcome.solutions.brother.com/bsc/public/Model_list.aspx?reg=us&c=us&lang=en&titleid=36

I hope this helps! Thanks for keeping the Art of sewing going!!!!
Happy sewing!

Brother LS-1217... | Answered on Mar 03, 2020 | 1,083 views


You should be able to fix this. IF it is the top thread on your fabric that is screwy you need to adjust the bobbin tension.
If it is the bottom thread you have a problem with your upper tension. Blow out the upper tension assembly using canned air, the tension discs may be dirty

Brother LS-1217... | Answered on Aug 10, 2018 | 837 views


Ok, since you said a needle broke, that is a good indication of where to look. You obviously already installed a brand new needle (which is the first thing to do). Verify that you have installed the needle facing the correct direction--there is usually a flat surface on the needle that needs to face a particular direction in the machine. Remove the bobbin from the machine and rethread it and install it correctly in the machine.

If you've done all of this and the machine still will not pick up the bobbin thread, the bad news is that the broken needle may have knocked the machine out of time. Sorry, that happens a lot with broken needles. You will probably need to take it for service as the needle and hook timing are out of sync.

Brother LS-1217... | Answered on Feb 25, 2018 | 171 views


hi there.
this is all i could find.go to this link and see if it helps you out.
Bobbin thread won come up with top thread Google Search

Brother LS-1217... | Answered on Nov 18, 2017 | 253 views


Re thread the machine, and make sure the bobbin is installed correctly.
Cheers,
Chance
Embroidery Services
San Diego, CA

Brother LS-1217... | Answered on May 04, 2017 | 60 views


I would try here Support Center it is the brothers site for : Find official Brother LS1217 FAQs, videos, manuals, drivers and downloads here. Get the answers and technical support you are looking for. The information is not in the regular manual you need the tec manual that the repairmen learn from I hope this helps

Brother LS-1217... | Answered on Apr 21, 2017 | 109 views


Try here.
https://www.manualslib.com/manual/219352/Brother-Ls-1217.html

Brother LS-1217... | Answered on Jan 02, 2017 | 63 views


Fixya does not sell replacement tables.

Brother LS-1217... | Answered on Sep 08, 2016 | 506 views


make sure the zig zag stitch is in the O position

Brother LS-1217... | Answered on Aug 17, 2015 | 216 views


Look for a dial or switch under your machine, it may be difficult to move! Good luck!

Brother LS-1217... | Answered on Jul 11, 2015 | 92 views


Dear Sir / Madam, please get your book out and follow the threading instructions very carefully. I am certain that is your only problem.
Kindest Regards,
Cookey.

Brother LS-1217... | Answered on Jul 09, 2015 | 271 views


It sounds like you maybe using the wrong needle size for the material you are sewing, or perhaps it is the thread. I've found that not all threads are created equal and it may be too fine/heavy for the needle gauge your using.

Check out this site. All the Q&A answers in simple language, as well as a GREAT cust. support staff. (its a Brother after all!)


http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/model_top/HomeSewingMachine/hf_ls1217eus.html?reg=us&c=us_ot&lang=en&prod=hf_ls1217eus

I hope this was helpful. Good luck and...
Happy sewing!

Brother LS-1217... | Answered on Mar 08, 2015 | 155 views


No that is not a walking foot machine. There are no industrial walking feet that will last.

Brother LS-1217... | Answered on Jan 28, 2015 | 114 views


top tension is to tight, loosen it (the tension above the needle)

Brother LS-1217... | Answered on Jan 02, 2015 | 137 views


not threaded properly

Brother LS-1217... | Answered on Jan 02, 2015 | 44 views


Lift the presser foot when you thread the machine and this should resolve the problem.

When the foot is up, the tension is open and can accept the thread as it should.

When the foot is down, the tension can control the flow of thread according to the setting you have selected.

Brother LS-1217... | Answered on Dec 17, 2014 | 350 views


New needle. Try to find the Schmetz brand, they are the best.

Brother LS-1217... | Answered on Dec 03, 2014 | 41 views


Have you checked the oil in the thing?

Brother LS-1217... | Answered on Nov 01, 2013 | 24 views

Not finding what you are looking for?
Brother LS-1217 Mechanical Sewing Machine Logo

271 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Cindy Wells

Level 3 Expert

6114 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...