20 Most Recent Husqvarna Viking 1 - Page 8 Questions & Answers

Sounds like cable has become disconnected inside machine or emb unit. Have it checked by authorized Viking Dealer. Check website http://www.husqvarnaviking.com/us for nearest Viking dealer.

Suggest checking the user manual. Manuals can be viewed, downloaded, or printed at http://www.manuals.husqvarnaviking.com

Suggest checking the user manual. Manuals can be viewed, downloaded, or printed at http://www.manuals.husqvarnaviking.com Use sewing machine oil which is a clear oil. Or you can use Tri-Flow Lubricant which is available at most bicycle repair shops.

Suggest checking the user manual. Manuals can be viewed, downloaded, or printed at http://www.manuals.husqvarnaviking.com

Possibly bad card. If other cards work, its a bad card. Not really anyway to fix the card as far as I know. Sorry, I don't have more encouraging news.

Check the user manual. You can view, download, or print the manual from the viking website - http://www.manuals.husqvarnaviking.com

Sounds like the feed dog stepper motor has gone bad. It will need to be replaced by an experienced service technician. Suggest you use an authorized Husqvarna Viking dealer for repair. You can find your nearest dealer from their website and use Locate a Dealer - http://www.husqvarnaviking.com/us

You can find Viking Machine manuals online at http://www.manuals.husqvarnaviking.com

Remove the needle plate and make sure there is no lint obstructing the feed dogs. If they are clear, it is usually the feed dog step motor gone bad. You should have your machine serviced by an authorized Husqvarna Viking dealer. You can find your nearest dealer at the Husqvarna Viking website - http://www.husqvarnaviking.com/us

The part is no longer available from Viking. However, you might be able to buy a used one on ebay or from sewing machine parts. However, you might try contacting some of the Viking stores to determine if they have a used one from a machine they use for parts. You can send me a private email and I'll give you some Viking dealers you can contact. email: [email protected]

Hi,
According to your problem change the settings of your machine. Reset can make your machine working.

Please provide more info re what needs calibration on your Lily, and which model of Lily is it.

The rear cover has a screw at the top. Remove that and lift up on the rear cover as you gently pry it outward at the top and it will come off.

A couple of video's that should help. How to Clean Husqvarna Viking Sewing Machine THREAD OIL REPAIR SERVICE NEWER STYLE VIKING SEWING MACHINES IN MODESTO...

look at the cam gear. This is the unit that the cam connects to. It could have a crack or be split completely. If there is a crack the cam stack will have to be replaced. The parts are hard to get and a good technician is needed.

The bobbin sits on a bobbin holder for winding. To initiate winding, the winder leaver should be pushed toward the bobbin on the holder. If the bobbin is over-winding, the winder leaver needs to be rotated so that the section pointing towards the bobbin is closer. This can be done by gently rotating the winding leaver by hand, remember gently. It will not need much rotation, so do not overturn ... most of all be gentle. If it does not budge, the screw in the middle of the winder lever may be loosened and the winder leaver rotated. Make sure to tighten the screw when finished. This should get the bobbin comfortably full. If the bobbin still continues to over-wind then the sensor underneath may need attention by you local technician. Do not attempt to open your Viking 1 as it may cause extensive damage and.will also null all warranties Let me know how you go. Cheers.

I believe you just remove the thread from the threads you are notusing.

You will have to maintain an XP computer or buy new software there is no fix for your problem.It's the electronic age the old software was written for the XP operating system.When MS changed the operating system Husqvarna Viking had to design new software it's that simple.Don't blame the manufacturer Microsoft made the changes that created the problem. www.sewvac.com

All Vikings are pretty much the same Start at back of machine go threw tiny hook / Then go down the track / catch on the hook then down into the other hook just before needle thread needle . Make sure nobody has messed with your tension that its set at the little red mark . also make sure your bobbin slides easily but not to loosely off bobbin that you have thread it into place.