20 Most Recent
Husqvarna Rose - Page 6 Questions & Answers
When I try to sew with presser foot, it beeps.
Hello :
read this carefully : http://www.ehow.com/search.aspx?s=presser+foot+sewing+machine&Options=0
and try this for maintenance :
-
Make sure the presser foot you purchase fits correctly on
your specific machine. Some come with universal fittings that are
adjustable to fit most machines. The wrong foot can damage your machine
or break needles if it does not fit properly.
-
Step 2
Use the correct presser foot for the particular job for which
it is made. Using the incorrect foot may cause the needle to break or
cause damage to the machine. This is especially true if you are using a
foot with a single needle hole and have the machine set for a zig-zag
stitch.
-
Step 3
Keep your presser foot in the original packaging with the
instructions. Some feet may be a little more complicated than others and
may require a more detailed set up. You may need to refer to the
instructions if you do not use the foot very often.
-
Step 4
Remove lint and oil with a clean cloth or soft brush before
putting your presser foot away.
-
Step 5
Store your presser feet away from high humidity and moisture
to prevent rust and corrosion. Some of the older machine presser feet
are more likely to become rusty because of the metal used to make them.
-
Step 6
Place all of your presser feet in a container to avoid
damaging them and to keep them dust free. This is also a good way to
have the feet handy when you need them .
good luck
rate if useful please !
Bobbin is not threading correctly
It could be hook and needle timing. Suggest it be serviced by an authorized Husqvarna Viking service technician.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Embroidery not working
If still an issue, suggest you visit an authorized Husqvarna Viking dealer for assistance. They are usually eager to help. It sounds like it may be time for the machine to be serviced.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Mc 5700 problem
Check for loose threads or fluff in upper tension unit and bobbin case tension gauged to 14g resistence. Otherwise, service time I'm afraid. Have it serviced by an authorized Husqvarna Viking Service Technician.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Card reader and dongle
Posted 2 years ago. If still an issue, see another authorized dealer.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Presser foot husquvarna rose
You should be able to adjust the pressure on the presser foot. Check your user manual or see an authorized husqvarna viking dealer for assistance. They are usually eager to help.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Change size of hoop on machine for the 4d software
If your machine is a Rose, it may not be able to take a different size hoop. Suggest you stop by an authorized husqvarna viking dealer for assistance. They are usually eager to help.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Embroidery unit
Not sure. You might be able to find a used one -- try ebay. Otherwise, see an authorized Husqvarna Viking dealer for assistance.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
Husqvarna Rose embroidery unit stopping mid picture.
Could be the design you're trying to stitch out is eroded. Try rewriting the design to the card and see if that helps. If not, take your machine along with the embroidery unit, peddle, hoops, etc. to your tech for a once over. It may just need an adjustment.
My Husqvarna Rose has been
Check the upper tension unit to make sure you don't have any loose threads or fluff in the unit causing the tension not to hold taunt when the needle enters the bobbin area. Otherwise, find another dealer for service.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
My embroidery unit on the Rose squeaks loudly
Typically does not need oiling but if you do, use Tri-Flow oil available from most bicycle shops. But it would highly recommend you take it for service at an authorized Husqvarna Viking service technician.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.
I had the Husqvarna Viking Rose machine with the
Your software cannot connect through a usb port if it originally connected through a printer port. The usb option came about in later versions of husqvarna's software and there is no patch that makes it work through a usb hub. Her only option for running your old software is to have an older computer with the parallel port for the printer style cable.
Not finding what you are looking for?