20 Most Recent
Sew Smart Compact Cordless 17390B Sewing Machine - Page 8 Questions & Answers
I have an Emerald 116
HOW TO FIX YOUR FEEDER TEETH (DOG TEETH) ON EMERALD 116/118/120 IF THEY STOP WORKING....So this is just a temporary solution to this problem... after reading through the user's guide (which really needs to be updated to have more troubleshooting suggestions), and basically taking apart various parts of the machine, I found a temporary solution. 1. Unscrew the Face Place (where the needle is attached to. #9 in User Guide Overview) There is only one screw on the side right underneath the Pressure Foot Pressure Dial (#8 in User Guide Overview). Taking off the Face Place gives you room to use a screwdriver for step 2... 2. Unscrew the Needle Plate (#12 in User Guide Overview), and take out the Bobbin holder (black). Slide the lever for the Feed Teeth to the raised position, and with your forefinger pop up the Feed Teeth (underneath the needle) to the raised position. You will here a click... and you are set to go. Reassembly your machine and get back to sewing!
Where can I get a copy of the manual for the Happy Lock UHT J1867 serger?
'Mary' provides a great solution which should be down here. The section up above is to ask the OP for further information before committing to an answer which then makes the question 'Solved'.
Mary Sep 20, 2023
The Happy Lock was made by the same company that made the Riccar RL 603. manualslib has a free download for the Riccar model RL 603 ( search without a dash just like I typed it ) or try the link I've added ( it works as of today )
https://www.manualslib.com/manual/140657...
I was able to figure this out by taking a photo of my serger and doing an g image search. This method isn't perfect but I've had success overall as long as the photo is clean, clear of any clutter, and cropped to just show the item I'm looking for help matching up.
..
I need the owners manual
The Happy Lock Serger was sold by Montgomery Wards and made for them by Riccar or the same company that made the Riccar. The Happylock UTH-J-1867 is the same as the Riccar Model RL 603. Search manualslib for the owners manual and it's available for free download. I was just looking for the same thing when I did an image search of my newly acquired ( old ) serger and found the info to cross reference the model.
My Husqvarna's needle is hitting the throat plate. What is wrong?
Take the needle out and look at it. Your daughter may have bent it, or she may have taken it out and put it back in the wrong way around. Flat on the needle, flat to the shaft on most machines. Also with the needle out, and no thread you can try running zig-zag, the change back to straight stitch.
Not finding what you are looking for?