20 Most Recent BellSouth 2231TE (22 Channels) 2-Way Radio Questions & Answers

0helpful
2answers

What is the range for distance for my bellsouth walkie talkies model 2231

The manual says: Channels Available - 22 Channels Output ERP Power (TX) - 0.5W (FCC Maximum) BatteryLife - 30 Hours (typical) Range - About 2 Miles
6/16/2016 2:50:52 AM • BellSouth 2231TE... • Answered on Jun 16, 2016
0helpful
1answer

NEED USER MANUAL

1/2/2009 1:54:23 AM • BellSouth 2231TE... • Answered on Jan 02, 2009
0helpful
1answer

Neither Radio Transmits or Recieves

Have you checked that both radios are in the same Channel and the same Squelch Code? are the batteries ok? any rust in the battery contacts? Some FRS radios gets a Malfuntion, and the syntom is like that, check this first
1/19/2007 4:24:08 PM • BellSouth 2231TE... • Answered on Jan 19, 2007
0helpful
1answer

One tansciever is locked (with key icon on screen)

have you tried pressing the Menu key for 5 or 10 seconds?, in mostly or the FRS radios works this way. Good Luck Neto
1/19/2007 4:20:47 PM • BellSouth 2231TE... • Answered on Jan 19, 2007
0helpful
1answer

Ny bellsouth 1010 walkie talkie are locked, there is A sign of A key in the display And I cannot remove it

The key shown on the display is a "Button Lock". Press and hold the LAMP+ button until the key goes away. Manuals for the 1010 are still available from WOOIL telcom
1/10/2022 11:14:45 PM • BellSouth Radio... • Answered on Jan 10, 2022
0helpful
2answers

I need a charger for bellsouth 2210 walkie talkie

sorry we do not sell parts here.
3/28/2019 9:30:54 PM • BellSouth Radio... • Answered on Mar 28, 2019
0helpful
1answer

Is the two way radio easily fixed, suspect mic, or is it garbage?

If you can do minor soldering, you may be able to fix the radio. They have no parts available, so they are considered "junk" when they break. But if you do the following, you may be able to repair it: open radio, unscrew the housing and pull it apart. Take the circuit board and look for corrosion, it often looks greenish or white. If the radio has a lot, there is water damage. You may still be able to fix it. You've gone this far! Use a Q Tip dipped in rubbing alcohol and remove as much corrosion as you can. Let it dry. Take your soldering gun and lightly resolder each spot on the circuit board. Touch the tip, as soon as the solder turns liquid, remove it! I have fixedhundreds of radios and cell phones by doing this. But it may not work. It just takes your labor! Good luck!
3/28/2019 8:09:45 PM • BellSouth Radio... • Answered on Mar 28, 2019
0helpful
1answer

My Bellsouth 1010 Wilkie talkies power up fine. Can blow and this transmits fine but talking does not transmit. What am I doing wrong?? I am on the same channel with both.

Please try to have the 2 receivers at least 20-30 ft apart. You may be overloading them if you are too close.
10/8/2018 2:45:51 PM • BellSouth Radio... • Answered on Oct 08, 2018
0helpful
1answer

I am looking for a manual for the BellSouth 1050 walkie talkie.

To get the user manual for your 1050s, go here: https://fccid.io/O631050LD02/User-Manual/users-manual-234549 Good luck.
1/26/2018 6:06:45 AM • BellSouth Radio... • Answered on Jan 26, 2018
0helpful
1answer

I have a set of Bellsouth walkie talkies and on one, all though I can change the volume settings, I can not get it loud enough to hear unless i put it tight to my ear

Very likely a blown speaker. Those speakers do not stand up to weather well and may have gotten wet. The only solution is replacement. Since you cannot buy a speaker, you would need to buy another radio and use it for parts. Better yet, buy a working radio and use you old one for parts.
6/22/2017 6:27:19 PM • BellSouth Radio... • Answered on Jun 22, 2017
0helpful
1answer

I have 2 bellsouth 2250 walkie talkies and have set them both to the same channel and subchannel, but cannot get them to communicate. What am I doing wrong?

Nothing. You have already said channel, which is frequency and sub channel, which is called a lot of things. You are 99% ahead! My best guess: turn them Off and On. Then check the channel and subchannel again. One of the radios did not save the information or lock it into the memory. The On/Off cycle may save it and they will work! Let's cross our fingers. But do not hesitate to reprogram them as many as 3-5 times and look for a SAVE feature in the manual. Best of luck!
2/13/2017 4:07:12 AM • BellSouth Radio... • Answered on Feb 13, 2017
0answers
Not finding what you are looking for?
BellSouth 2231TE (22 Channels) 2-Way Radio Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top BellSouth Radio Communications Experts

Cindy Wells

Level 3 Expert

6583 Answers

Steve

Level 3 Expert

3290 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a BellSouth Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

BellSouth Radio Communications

  • BellSouth Radio Communications

Most Popular Question

need user manual

  • Radio Communications
Loading...