20 Most Recent
Copystar CS-1810 Copier - Page 5 Questions & Answers
Copystar cs-1815 error code 3200, how can it be fixed
If it is a c-3200 code it means that you have a exposure lamp problem.Defective scanner,defective scanner PCB,lamp or inverter board,incorrect shading,poor contact of the connector terminals on lamp assembly. Look for a bad connection And look at lamp. Look for blue rings or burnt ends. Now don't look at that light while its on.
Copystar C2300 problem ?
fuser motor lock. bad fuser or exit turnover assembly not rotating properly. the duplex unit could also bind causing this. run u030 in service mode to check the motor.
Black streaks on both side of paper when copy on glass
Throwing the machine away is the best recommendation. You have a bad drum/developer that is leaking some toner. Could be a bad cleaner blade for streaks on the front; fallen toner for streaks on the back. Careful cleaning, replace transfer roller. First, check the condition of the fuser assembly. If the soft roller is bad it will leave toner buildup on the teflon roller, and vice-versa. Start there.
How do I stop fax redial on Copystar 4035?
You have to be in the fax screen and find your User install or Initial settings screen. Redial can be set there. There's a default setting that I think you can set to "0" redials. I haven't had that manual for a long time.
Connect a copier to my computer
The Ri 2530/3530 is termed a Digital Copier/Network Printer. Therefore it would need an ethernet connection to your local area network (LAN) and does not appear to directly connect to a computer. The spec states: Connectivity / Interface: Standard 10/100BaseTX, Parallel IEEE1284, Serial RS-232C.
As it is 2001, you next need a valid software driver to print - it is quoted as Windows OS Compatibility: Windows 95/98/Me/NT4.x/2000/XP. The following web site should help you.
Product Details
Not finding what you are looking for?