Top 20 Puma Active Collection Dynamic Posh Black Jeweled #PU101122001 Watch for Women Questions & Answers

Dont have that particular watch, but see if this works.

Setting the time on the PU910222003 Puma ladies watch.

The process may be less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)

To change the time, day, date etc, on your watch you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.

By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.

When you are done. Touch the bottom of the dial to exit this setting mode.

Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.

Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.

Dont have that particular watch, but try this.

Setting the time on the PU910222003 Puma ladies watch.

The process is actually less complicated than you would think.

First, a couple things you need to know and remember.

1. The watch has a safety feature which requires you to press the touch button on the right side of the watch before you can do anything as far as touching and changing anything. If it did not, every time you accidentally touched the dial something would change.

2. Touch means you are touching the dial and the (stones or outer edge)

To change the time, day, date etc, on your PU910222003 you must first press the touch button on the side. The word touch will light up (display) inside the watch on the right side of the dial.

Now you are ready to change stuff.

Touch the dial and the little what looks like bling at the bottom of the watch. You need to be touching the watch dial and these stones at the same time to do anything we are about to do.

While touching and holding the bottom of the dial you may see the back light turn on.

That is actually how you do that.

By continuing to touch and hold the bottom of the dial, you will then see the word hold at the top and then the hour of the time flash.

To increment the time or decrement the time, touch the right side of the dial or the left side of the dial. When you have arrived at the current hour, touch the hour at the top again and the minutes will begin to flash.

Continue to set all settings in this manner until you are satisfied. Touching the top to move to the next setting and right or left of dial to go up or down.

When you are done. Touch the bottom of the dial to exit this setting mode.

Day to day use,

Touch the time at the top of the dial to scroll through the time, chrono, alarm etc. To see time if the screen saver is on, touch the left side of the dial. Touching this repeatedly will also scroll through all the phrases programmed into the watch.

While touching and holding the bottom of the dial you will see the back light turn on.

Cool feature,

This watch actually has two displayable times you can use if you travel often to a second time zone. Press the touch button on the side and touch the right side of the dial. Touching it for a second or two will display the time of the second time zone. Touching and holding for a couple more seconds will cause the T2 on the display of the left side of the watch to flash and eventually switch to the second time. I am thinking that touching the bottom of the watch while displaying the second time should allow you to set this time also.

Here is the manual https://fossil2020.my.salesforce.com/sfc/p/#6g000008LGWF/a/4v0000005sQs/EzV7SuZf_2g3Vc_HcAkg0fJveyoJ2fJO4.YiC.iCvF0 Made by Fossil https://puma.fgservices.com/s/article/Watch-Instructions-Manual-Puma?language=en_US ..

You should specify the width of the strap or bracelet in mm and look for it in Amazon or any retail storehttp://www.amazon.com/Silicone-Soft-Rubber-Watch-Band/dp/B00DU3EX70A good rubber strap might cost between 10 and 20 USD

TRY THE JEWELRY COUNTER AT ANY WALMART

Hi Nilavarasan, I have this site for you where you can see the exact service center nearest in your location. Hope it helps. Find PUMA Store or Retailer Near You

yes it is the battery problem, any service center accepts battery replacement, find one on your loation. i hope i had been helped you.

click on the top right button to view time, then click bottom right button and hold it as the time is still appears. then it will start blinking. if you press the bottom right button you will be able to swap the command you want to change (H,Min,Y,D,M) and if you press the top right button you can increase (only) the number you like. Left buttons i dont know what they do :P

mindandirikada!

I have examined their web site but they do not list manuals.

Their customer service site sounds as if they would be only too pleased to help you on this.

Try going to http://www.shop.puma.com/Contact-Us/CONTACT,en_US,pg.html and e-mailing them about your problem. They should be able to send you a copy.

How to set with 3 buttons

mcdevito75 here, You can try to contact Puma watches online, try Puma watches.com or look for a small watch repair shop in your area for replacement strap.

It looks to me as a year. Your watch can be used from the year 2000 until 2049 inclusive. Rate me, plz.

Hi


Thanks for using FixYa. You can download its manual from this link:

Puma Watch Manual


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks

Rylee

how to reset date

I want to change the time but was not as
I could help?

Question edited for clarity. Please don't type in all CAPS, it is considered SHOUTING and is harder to read especially in a jumble of words and numbers. 377, although a maker would be useful! https://www.google.com/search?q=battery+METAL+BEZEL+STAINLESS+STEEL+BACK+10%2F4312-13+75311+THAILAND+MOVT ..

https://www.fixya.com/support/r27181038-changing_watch_batteries Or risk it ..

Question edited for clarity. Armani and Emporio in wrong order. Quality Watch... Best advice https://www.fixya.com/support/r27181038-changing_watch_batteries The same as the one in it if it has one. Battery for Emporio Armani - GP A76 / LR44 / V13GA Coin cell (Amount 1)

Emporio Armani products - BatteryUpgrade

BatteryUpgrade https://www.batteryupgrade.com > ... > Emporio Armani .. If you got it on eBay, it is a Chinese copy https://www.google.com/search?q=Armani+Emporio+AR+0911 ..

1. Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
2. Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
3. Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
4. Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
5. Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
6. Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.