20 Most Recent
Konica Minolta Di1610 Copier - Page 2 Questions & Answers
Develop ineo 161
open then close the front door -> the display show " CHANGE DRUM ? YES/NO " -> press yes on the board
Can there be another problem
Power OFF/ON while holding the Panel Reset and No button, then access the tech mode and change the ADJUST in the TC type to 0 for USA.
How do i clear
If there is paper trapped physically then it must be removed mechanically by removing the roller assembly and resetting. You need to check forr pieces of paper that have jammed or is obstructing the sensor as it displays the error.Now if there is no paper locked within it can be failure of the optocoupler sensors that is causing the error. There are placed at the take up paper in-detect section and can be confirmed using a test for continuous voltage feed from the sensor.
COF32
developer gain problem .if ur a rep then u can adjust the gain in the service mode.it is tricky but possible .otherwise u have to install new developer and initialize it.this will solve ur problem
Not finding what you are looking for?