20 Most Recent Minolta CF1501 Copier Questions & Answers

0helpful
1answer

I dont know how to

3/1/2015 7:56:44 PM • Minolta CF1501... • Answered on Mar 01, 2015
0helpful
1answer

Cf 1501 copier need fuser unit

2/17/2015 12:14:10 AM • Minolta CF1501... • Answered on Feb 17, 2015
0helpful
1answer

Minolta 1501 errorcode COF32

Remove the black image unit and shake it so that the developer and toner inside of it is spread along the entire length of the image unit. reseat it install it correctly. if not get a new one Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
2/15/2015 12:53:27 AM • Minolta CF1501... • Answered on Feb 15, 2015
0helpful
1answer

Error code c0650

Scanner the thing that moves underneath the big glass when a copy is made. And has the bright light on it does not know where home is or the position that normally is in before a copy is made, remove the glass and check the sensor inside the frame the scanner is in the rear on the left side small and black may have dust on it or got hit by the scanner, have tech look at it., Reset button is located in the front of the machine inside the front cover on the right side you should see a cover that has 45 degree slant looking at it from the floor get down on the floor and look up you should see a small hole need a small screw driver send it up thru the hole to touch a small switch machine must be on to get the "Trouble Reset" switch Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
2/4/2015 4:42:07 AM • Minolta CF1501... • Answered on Feb 04, 2015
0helpful
1answer

Replaced imaging unit and still says replace

The image unit that you replaced mite have already been used? Try to reseat it. Could have a bad I/U. Is it 3rd party? The chip that tell the copier it is new is inside the I/u be careful not flip it over clean the contact of the chip contacts with alcohol if the chip was reset could be bad also. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
12/30/2014 8:25:19 PM • Minolta CF1501... • Answered on Dec 30, 2014
0helpful
1answer

How to change unite of transfert?

Will require to open both ends of the copier. Remove the waste toner box, remove to screw on the right side these two screw are located inside the machine they hold to metal release plates if you look inside the machine you will see the belt its the shinny thing (From the right side) once done there is a handle on the transfer belt assy. that you will pull out of the machine on the left side pulling the entire transfer belt out re reinstalling new belt assy. be careful not to nick it or the DRUMS below it. Then replace the two screws. that lock the transfer belt in place. there is a fuse in the new transfer belt which the copier will blow to ensure the belt is NEW (Normal Operation) Mite recommend a Tech do it. Just my humble opinion Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
12/6/2014 11:59:39 PM • Minolta CF1501... • Answered on Dec 06, 2014
0helpful
1answer

KM CF3102 Drivers for win7

go to this link to get the driver you are looking for: http://onyxweb.mykonicaminolta.com/OneStopProductSupport?appMode=Public
4/18/2014 1:54:56 PM • Minolta CF1501... • Answered on Apr 18, 2014
0helpful
2answers

My Minolta CF1501 is showing error COF 34

Before doing above open and close the front door. The code is for the Auto Toner Density Control the black image unit if it comes back after opening and closing the front door the image unit needs replacement. You can't change the developer it is all one unit. the fuser has a different code 500 series. Dont mess with gain let machine run stablize. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
10/11/2013 9:45:53 AM • Minolta CF1501... • Answered on Oct 11, 2013
0helpful
1answer

CF1501 error code c0650

C 0650 Scanner home sensor malfunction.Remove the original glass and clean the home sensor(the sensor is dirty,paper dust) located in the rigth rear corner.Move the mirror assy to maximum right position and you located the sensor.
2/16/2013 9:38:26 AM • Minolta CF1501... • Answered on Feb 16, 2013
0helpful
1answer

Plano elctrico minolca 1501

This is not a question
4/22/2012 8:11:03 PM • Minolta CF1501... • Answered on Apr 22, 2012
0helpful
1answer

Como resetar tarjeta minolta cf1501

A que tarjeta te refieres????????
Si es para reiniciar los chips de las unidades de imagen ponte en contacto conmigo.
victor
[email protected]
5/11/2011 4:42:09 AM • Minolta CF1501... • Answered on May 11, 2011
0helpful
1answer

Minolta 1081 copier, trying to locate the reset

just open the rear cover the upper portion then after you open it you will see a board the find the small botton on the lower right side then press it while the machine in on
11/20/2010 3:44:48 PM • Minolta CF1501... • Answered on Nov 20, 2010
0helpful
1answer

Driver for fiery x3e for operating system Windows 7

right click on my computer and then right click on the device for which you want driver then click on update driver.
1/8/2010 1:18:45 PM • Minolta CF1501... • Answered on Jan 08, 2010
0helpful
2answers

Background Color

1) In the Applications Menu on your copy screen there should be a option to turn on or off a background color fill. Turn it off and try. If it still comes out try hitting panel reset. If this doesnt work. 2) You have a bad Image Unit. Change the yellow image unit. 3) You may also have a bad write unit. Pull out the four write units and check the yellow write unit. It may have gone bad in which case it needs to be replaced.
12/22/2009 6:48:53 AM • Minolta CF1501... • Answered on Dec 22, 2009
0helpful
2answers

Minolta CF1501 color is blurry, black and white is fine

yes it can replace the oil roller
12/22/2009 6:11:24 AM • Minolta CF1501... • Answered on Dec 22, 2009
Not finding what you are looking for?
Office Equipment & Supplies Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Daniel Blask
Daniel Blask

Level 2 Expert

172 Answers

Mehandi Husain ...

Level 3 Expert

1441 Answers

George Mclaughlin

Level 2 Expert

370 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Minolta Office Equipment & Supplies

  • Minolta Office Equipment & Supplies

Most Popular Question

cf1501 error code c0650

  • Office Equipment & Supplies
Loading...