20 Most Recent
Korg PA3X61 61 Key Workstation with Touch Display Regular 886830349317 - Page 9 Questions & Answers
Q-See 8816 NVR system troubleshoot
To troubleshoot a Q-See NVR 8816 recorder, you can follow these general steps:
1. Power cycle the NVR: Turn off the NVR, unplug it from the power source, wait for a few minutes, and then plug it back in. This can help resolve temporary issues.
2. Check network connections: Ensure that all network cables are properly connected to the NVR and your network infrastructure. Make sure the network connection is stable and the cables are not damaged.
3. Check camera connections: Verify that the cameras are properly connected to the NVR. Ensure that the camera cables are securely plugged into the appropriate ports on the NVR and the cameras themselves.
4. Check power supply: Ensure that the NVR and cameras are receiving power. Check that all power cables and adapters are securely connected and functioning correctly.
5. Monitor display: Verify that the NVR is connected to a compatible display device (such as a monitor or TV) using the appropriate video output method (HDMI, VGA, etc.). Ensure that the display device is powered on and set to the correct input source.
6. Network configuration: Ensure that the NVR is correctly configured to connect to your network. Verify that the IP settings, including the IP address, subnet mask, gateway, and DNS settings, are properly configured.
7. Check hard drive status: If you are experiencing issues with recording or playback, verify the status of the hard drive installed in the NVR. Check if the hard drive is recognized and functioning properly. You may need to replace or reformat the hard drive if it is faulty.
8. Firmware updates: Check the Q-See website for any available firmware updates for your NVR model. Updating the firmware can resolve known issues and improve system performance.
9. Reset the NVR: If you are still experiencing problems, you can try performing a factory reset on the NVR. Refer to the user manual or contact Q-See customer support for specific instructions on how to reset your NVR model.
If the above troubleshooting steps do not resolve the issue with your Q-See NVR 8816 recorder, it is recommended to contact Q-See customer support or consult their online support resources for further assistance. They will have the expertise and specific knowledge about your device to provide you with accurate guidance and solutions.
My ATS Timecom timeclock had a system problem. System problem was resolved, but then there was no power to timeclock. No display-dead. Anyone have any advice.
- Check the power source: Ensure that the power source supplying electricity to the timeclock system is functioning properly. Make sure the power outlet is receiving power and the circuit breaker or fuse for that outlet hasn't tripped or blown.
- Verify power connections: Check the power cables and connections for any damage or loose connections. If necessary, unplug and reconnect the power cables securely.
- Restart the system: Sometimes, the timeclock system may encounter temporary glitches. Try restarting the system by unplugging it from the power source, waiting for a few seconds, and then plugging it back in.
- Check battery backup (if applicable): If your ATS Timecom timeclock system has a battery backup feature, ensure that the battery is properly connected and charged. If the power outage was brief, the system might still have battery power to continue functioning. If the battery is low or depleted, consider replacing it.
- Contact technical support: If you have followed the steps above and the timeclock system still does not power on, it is recommended to contact the technical support or customer service of ATS Timecom. They will be able to provide you with specific troubleshooting steps based on your system model and configuration.
Clash of clans free gems
I cant believe I found this just now: http://clashofclanshelper.com/ - you receive free Clash of Clans gems instantly! Everybody uses this now! (IzozRftDa4)
Genius sp-g16
A program from Diversoft called Driver Genius when used will search your computer for lost, old, or non-existent drivers.
It will download the drivers for the sound system on the board and install it for you.
Not finding what you are looking for?