20 Most Recent
EnGenius EP436 Phone - Page 9 Questions & Answers
How to set ringtones
Go to User profiles, select general, then customize, next chose which ever sim you use. Scroll down to an empty slot. From there you should be able to chose music for your ringtone.
7/13/2022 4:41:28 AM •
Lands Phones
•
Answered
on Jul 13, 2022
I need a draft sample of letter of resignation from company to employee
Check and confirm with a labor attorney or your State Department of Labor that you are in an at-will employment state. That being the case you are free to fire anyone anytime. You don't have to have a reason.
If that's not the case, ignore the rest of this advice.
In an at-will employment State, you don't want to put anything in writing. This is a conversation with the employee, and it's very short. You're fired. Here's what I need from you. Here's what you need from me.
If they start asking questions, say "I wish you the best in your future endeavors", and offer to help them clean out their desk. You will want to have a couple of cardboard boxes ready for that.
Go to Amazon and buy a book named" fire someone today"
The more you overthink this, the more you put yourself at risk.
7/8/2022 9:47:38 AM •
Lands Phones
•
Answered
on Jul 08, 2022
Number of rings cs6829 of rings to change
Do you mean the VTech CS6829 cordless phone system? You can choose between 2 - 6 rings or toll saver. (Toll saver rings twice when new messages are on the answering system. If there are no new messages, it will ring 4 times.) To change the setting, press Menu (top right hand side of the buttons surrounding the volume buttons) on a handset when the system is in standby (no handsets in use for a call or accessing the system). Use the up and down arrows (volume) to reach the line labeled Answering sys. Press the Menu button to select this. Use the arrow keys to navigate to Ans sys setup and press Menu to select. Repeat the navigation to highlight and select # of rings. Repeat to highlight the desired number of rings and press Menu/Select to save your choice. You should hear a confirmation tone. Press Off/Cancel (the lower right hand button around the volume buttons) to exit the menu system.
The manual for the VTech CS6829 is available on the product page:
https://www.vtechphones.com/store/pd/2346/CS6829-Cordless-Answering-System-with-Caller-ID-Call-Waiting . The current link to the manual is
https://cdn-web.vtp-media.com/products/CS/CS6829/CS6829_UM_V5_20141205.pdf . See page 25 for the section on setting the number of rings.
I hope this helps.
Cindy Wells
6/20/2022 5:16:21 PM •
Lands Phones
•
Answered
on Jun 20, 2022
My mickey mouse touchtone phone
This may be your lucky day :-) If your MM is an early ATC model, you might be able to just REVERSE the red and green wires on the jack or base cord. Usually, the touch tone pad will make a little pressing sound but no tone comes out. Early TT pads were polarity sensitive and that's what we used to restrict dialing (yeah, remember phones USED to be hardwired into the jacks). Anyway, try that first. If the pad is really dead, you can probably order a replacement one for about $20, the labor and instructions to replace it will probably double or triple that.
If you find that it is not just polarized, pry up the faceplate and read the number on the side of the tone pad and post it here. It's probably a 35xxxxEPG or A!. I think I have a couple of those and the wiring diagram here.
Carl
5/22/2022 11:34:46 PM •
Lands Phones
•
Answered
on May 22, 2022
Not finding what you are looking for?