20 Most Recent GE WSM2420T Top Load Stacked Washer / Dryer - Page 8 Questions & Answers


If the FILTER is not cleaned after each load was completed this will happen.

GE Washing... | Answered on Jan 31, 2019


Probable transmission failure

GE Washing... | Answered on Jan 31, 2019


The switch controlled by the knob probably has failed.

GE Washing... | Answered on Jan 26, 2019


The pump and/or controller could be defective.

GE Washing... | Answered on Jan 22, 2019


Stability arms are the problem if it leaks during the Spin cycle.
If it leaks on Wash or Rinse, the pump is bad.
washer-r5bj5m104gwgi1atksjipnx0-5-5.jpg

pump-r5bj5m104gwgi1atksjipnx0-5-9.jpg

GE Washing... | Answered on Jan 17, 2019


Is hot hose connected to hot faucet and cold to cold? When you had hoses off did you make sure water was coming out when cut on at faucet? If all is well with hoses and water supply, then your water valve may be bad. It also could be a control board issue

GE Washing... | Answered on Jan 09, 2019


disconnect from the mains supply for 5 minutes and reconnect.

or press the lock button for 5 seconds.

GE Washing... | Answered on Jan 06, 2019


Probably a problem with lid interlock operation

GE Washing... | Answered on Dec 23, 2018


If nothing is wrong with switch or latch, it’s a control board or wiring issue.

GE Washing... | Answered on Dec 18, 2018

Not finding what you are looking for?
GE WSM2420T Top Load Stacked Washer / Dryer Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4369 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Washing Machines

  • GE Washing Machines

Most Popular Question

when starting spin cycle will not spin

  • Washing Machines
Loading...