20 Most Recent Sharp AR-M160 Black and White Copier Questions & Answers

http://esupport.sharp-eu.com/eusearch/?TemplateLang=en&Lang=&DocTypeItem=DRV&Lang=gb&SearchString=ARM165&Show=Y

"Press # - Interrupt - C - Interrupt -14 - Start key" Thermistor open The thermistor is open. The fusing unit is not installed.

Fixing unit is bad the very hot part of the machine is bad replace the fuser unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

EEPROM error , need to order a new EEPROM from Japan, or a mainbord issue need to replace , no reset available

replace toner , just test toner motor first , and test developer unit is turning , and clean developer sensor,

You can sell it safely, copiers have no hard drives. No data is saved on it permanently.

Please replace all faulty consumables.

"Press # - Interrupt - C - Interrupt -14 - Start key Thermistor open The thermistor is open. The fusing unit is not installed.

error is sometimes a way for the machine to go into safe-mode when there is power fluctuations , or a problem with the machines thermistor or thermostat

specify the operating systemsystem bit rating

Most printers come with a cd that you have to put on your computer. The cd's have to drivers on. If you don't have the printer cd any longer, maybe contact the manufacturer or any electrical store, they may be able to order one for you.

There is need to solve the low current problem by simply rectifying it frfom the power supply.
enter simulation (use SIM14) 'C' 'auto' 'C' 14 copy key

it seems to be the problem of the drum.how many copies has it yielded .call a rep and change it