20 Most Recent GE APH10AA Air Conditioner - Page 5 Questions & Answers

respected sir,I am used in godrej split ac now AC starting the time is okey but after two or three minitues showing F6 .How can solve the problem please help me.Thanking your sir,msmohan

If your furnace is older than 1978 it has a standing pilot, which means it exists full time and is not intermittent in operation requiring a spark or hot surface ignition to ignite the pilot or pilot rail leading to the main burners. If you depress the pilot valve button and light the pilot and hold it in for a minute maybe 2 and it drops out, the thermocouple is usually why. The thermocouple creates 30 millivolts of electricity, this is not very much power a millivolt is 1/1000th of one volt. The 30 mv power is enough to hold the pilot valve open after you release the button after lighting the pilot, the replacement of the thermocouple is easy and they are available at any hardware store, they come in varying lengths, it is better to get one a bit longer than not long enough, you can loop the remainder.

The cold evaporator will collect condensed moisture and the condensation normaly drains out the condensation drain path.
As the evaporator fins sweat, dust and particles get stuck to the moisture and fins. Dirty evaporator fins hold more moisture than clean fins. As air rushes thru the fins, moisture is blown off.
It is important to maintain clean air filters, and to treat the evaporator with evaporator cleaner as needed. The outdoor condenser also needs free air flow, periodic cleaning.
It is normal for alga to form and clog condensation pans and drains, periodic cleaning is part of their maintenance too.
There are dedicated chemicals for the maintenance of severely contaminated situations, use as directed. I prefer flushing out clean with a garden hose, persistent alga needs chemicals in cake form or spray, use as prescribed by the product.

you may find a diagram inside the electric controls panel, or somewhere on the unit. Wishing you good luck with it.

It would have cooling intake and exhaust outside air for the outdoor coil or radiator and the inside cool air inside. Tilt back so any condensation drains outside dripping in mid air. If it won't fit on the window opening, then it is too big and should not be installed without modification, a difficult situation.

I would look for it inside the electric control panel or somewhere on the ac

Call GE customer service.

Sorry probably need to have someone look at this.

Dear Finley, If you are in the U.S.A., I recommend you type your model number into the web-site "Searspartsdirect" and you should get the schematic of your GE a/c. I tried to do this for you, and it said that was not a good number. Perhaps a number or letter is missing. God bless your efforts.

fixya is an online forum and remove front cover and replace filter

page 8 of your manual that came with unit GE ASH06LL 6000 BTU Air Conditioner Installation Manual Page 8

Possible refrigerant issue, possible air flow issue. Clean the filter.

Clogged condensate line could do it. I would start by being sure the condensate is draining

Yes@!!!!!!! If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79