Top 20
Epson Stylus NX300 All-In-One InkJet Printer Questions & Answers
My Epson NX300 prints just fine from anything on
Connect the scanner to an old USB HUB, and it will work. It stops when you connect to a new USB connection direct in a new PC. Done it. I worked with a 2 port USB HUB. Was posted someplase but I cant remember where. Magnar Vereide Datainstituttet.no
My printer is low on
The Nx300 printer needs to have all the colosr and the black with ink in them so that they will print. For the printer will not print unless there is ink in all the cartiages
Why does my Epson Stylus
DOES THIS COLOR SHOW UP ON YOUR PRINT PREVIEW?
IF NOT, THAN GO INTO PRINT CARTRIDGES ON YOUR COMPUTER AND CLEAN THEM UP!
THAN DO A TEST ON A SEPERATE PIECE OF PAPER THE SAME PICTURE TO MAKE SURE IT HAS STOPPED WITH THE RAINBOW PROBLEM YOU'RE HAVING.
YOU MAY ALSO HAVE PICTURE SETTINGS WRONG ON YOUR COMPUTER, YOU CAN CHECK THESE UNDER PRINT PREFERENCES.
IF NON OF THE ABOVE WORK, THAN TAKE YOUR PRINT CARTRIDGES OUT AND CLEAN THE CONTACTS WITH SOME RUBBING ALCOHOL AND A Q-TIP.
Printed copies are crumpling up
Hi there,
You most probably have a scrap of paper lodged in the feed path, or switch that is jammed. Try to look very closely at the input rollers and points beyond where the paper feeds in. Somewhere in that path there will be an obstruction or something jamming the switch. Roll the rollers gently wiping it off with a clean cloth checking every corner and side for any obstruction. Check the round robber rollers too as they might not be functioning properly or stuck. There is definitely something in the feed or output path that causes this.
As for the blotches on the left, you might need to check your printhead for problems.
Let me know if this has been of any help.
Out of Magenta but just
strangely enough, epson printers require all cartridges to have ink in or they don't seem to work.
I have a nx300 that
Sorry It is most likely fried, now if you are lucky it may just be the power adapter.
I suggest you call HP and see what representative can do for you.
800-474-6836
How do i scan items
Copy and paste the below URL into your address bar and follow the instructions. Save the instructions for future use.
http://files.support.epson.com/htmldocs/nx300_/nx300_ug/wwhelp/wwhimpl/js/html/wwhelp.htm
My printer will not load
first check the printer for bits of papper use a low pressure vaccum or blower to clean the papper then remove the printer tray and install them properly then switch off the printer and remove the usb cable and the power cable wit for few minutes an place them back then switch on the printer and the computer
Not finding what you are looking for?