20 Most Recent
GE 24 in. GSD1000G Built-in Dishwasher - Page 6 Questions & Answers
GE Potscrubber 900 just runs and runs, dial just sits there
Hello Debbe,
Does the dishwasher fill with water, or is full and fails to drain?
Can you provide additional detail so that we may accurately troubleshoot? Also include the complete model number. It should be etched or stamped on a plate inside the door, or elsewhere on the washer.
Thank you!
Soap dispenser doesn't open
How many cycles have you attempted? It may take a few cycles before the detergent pack becomes soft enough to run out and allow the latch to function properly.
Otherwise, if you can reply back with additional information such as model number, someone here on Fixya will be able to provide assistance.
Best regards,
Purchased ge dishwasher model ghda674n00bg
I know nothing of dishwashers but such check valves are usually included to prevent syphon-back when there is no air-break in the discharge.
Personally I prefer a high discharge with an air-break but many prefer a permanently fixed discharge which is usually low and in some conditions syphon-back can happen. In this case a check valve is advisable even if local building regulations don't require it.
Not finding what you are looking for?