20 Most Recent
Acer Aspire One AOD150-1920 Netbook - Page 7 Questions & Answers
F1 -f12 don't work
This is usually because the acer utility program is not running. Try reinstalling it. Go to the Acer website, support section, choose your note model and Windows version from the list and it will give you drivers to download. Amongst them will be an utility that controls these hotkeys.
YOU HAVE A DVD recovery cd Acer Aspire E1-531-406 PLEASE
ACER does not provide this service for that product. Users are expected to read the User's Guide, and in there it gives instructions on how to create Recovery Backup and Drivers and Applications Backup Disks prior to getting too far into use of the device. There is apparently no recovery partition that can be used, as it is not mentioned anywhere in the documentation. Under the circumstances, if you are down without backup media, unless you purchase a new OS disk (it doesn't have to Windows 8) and install that, you are stuck with a brick for a device. Their support website has hardware drivers for both Windows 7 and Windows 8. If you wanted to install Windows 10, odds are good that all drivers will be included in the OS itself. For any that are not, the Windows 8 driver would probably work just fine.
Or just buy a new laptop.
See my question
the items are Dimm1 and DImm2 which refer to the ram cards in the computer
type in --what is a dmm1 in a laptop and there is a video that explains the message and how to fix
take it to a computer repair shop as the os may be corrupted or a ram card is failing
My monitor's screen blinks
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Acer 6930g recovery
Power computer on. Hold Alt and keep pressing F10 at the Acer logo. You may need a password. If you have used Erecovery before you would have been asked to create a password.
If your first Erecovery the default password is 000000
Select Factory
If this fails, your recovery partition is probably corrupt, and you'll either need to contact Acer for recovery disks or use a Windows 7 installation disk
Not finding what you are looking for?