20 Most Recent GE JBP90 Electric Kitchen Range Questions & Answers

Either bake element is grounded out or control / clock is defective

Part number WB44T10011

Most likley you have a bad touchpad. Most times its a key that is stuck and there is nothing much you can do except replace the touchpad control. It is a common problem with all electronic ranges. If the range is 13 years old I would thik about replaceing it. Good luck

Hi-  If everything worked when stored, problem could be simple. The keypad is linked to the computer with a ribbon connector. The plug may have gotten corroded a bit in storage. Try this first: Unplug power. Remove back panel to access control. Remove four screws holding control. Unplug and inspect connector. Clean with a toothbrush and compressed air if you have it. Plug connector back in, re-assemble, and see if touchpad works.  Let me know if this info helps.  Have more if needed. - Ed

Hey there Mic Bish.First let me say, that's a quality appliance you've got on your hands there, so congratulations!The thing is with that particular model, it was made in a factory in China near a haunted wood. There have been unconfirmed reports about spirits finding their way into the machines. What you've got on your hands there is a ghost, locked in a battle between accepting it's fate, and trying to return to the land of the living. Scary stuff!!!Mr Muscle have a new spray to deal with this. You'll find it in the cleaning aisle of your local convenience store.Hope this helps,Kind Regards

sounds like your bake element is ready to burn out .or already has if its not getting red its out look at element for any abnomalitys like the coating should look the same from start an stop of element

check the thermostat switch most cases