20 Most Recent
Sabre LCT371BKA LCD TV - Page 4 Questions & Answers
Sabre tv model # PDP42X32000 D57 AND D58 RED LIGHTS ON AND D45 BLINKING RED. SCREEN IS SHOWING FUZZY PICTURE IN AND OUT
Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Cannot find the code for a Sabre Model No PDT425BKA
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Waiting on the code for direct tv remote for flat panel Sabre Tv
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the
brand name only of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.
Setting up
If it is brand-new, then contact the store that sold it to you, and get assistance from them. After all, if you just paid them a good chunk of money, they "owe" you. Or, get them to replace it, under their warranty.
Not powering on
All I know is, usually bad caps in ps section. IC's are usually ok. Bad Chinese Caps.
What is the code for a 20 inch LCD Sabre tv?
038,031,035. Try these codes. If
you wish to get more details, check the sites linked here. Set-up code list, and Set-up procedure to
many popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to
Mosaic
/ Timeslide, can be selected by the
drop-down list, at the top left
of the display window, will make surf easy. You can also do a
search, by type in the
brand name of your TV / Device, in the search box
at the top right of the display window.
I have a Sabre LCD that was apparently struck by
Nobody can predict, what might have been happend to the TV, due to lighning stroke. You TV need a through checkup. Contact any service technician. It sounds almost like the main digital board has damaged.
Not finding what you are looking for?